Supplier for race spec clutches

Mon Apr 27, 2009 6:01 pm

well since nobody seemed to know anything I got hold of John Wilcocks one of the guys who organises the TTRS series ( who has raced both 325s and M3s E30s )and he told me that the clutch would be made by a company Helix- based in Banbury.
Sure enough it was and the paddle type clutch plate alone is £164 cover plate is the same again and the bearing £40

Anyone come across these people before?

Mon Apr 27, 2009 11:53 pm

Yeah, we had a sponsorship agreement then got totaly ignored by them when it came actualy getting anything from them, just gave up. They're renouned for being difficult but you never know.

What engine is it for?

Tue Apr 28, 2009 12:24 am

its for an M20B25

Tue Apr 28, 2009 1:20 am

I have one in my car..

I have heard of them falling apart, but mine is fine with a Sachs Uprated cover..

Thu Apr 30, 2009 1:00 pm

Why bother? The standard clutch is good for 300lb-ft+. Nothing N/A will break it.

Fri May 01, 2009 3:09 pm

Paynts wrote:well since nobody seemed to know anything I got hold of John Wilcocks one of the guys who organises the TTRS series ( who has raced both 325s and M3s E30s )and he told me that the clutch would be made by a company Helix- based in Banbury.
Sure enough it was and the paddle type clutch plate alone is £164 cover plate is the same again and the bearing £40

Anyone come across these people before?

Try Mardi Gras Motorsports at Silverstone.

http://www.mardigras.co.uk/

You may as well get a lightened Flywheel while your at it. Big Bavarian Beauties are running a group buy at the moment.