e30 318is block q!
Moderator: martauto
-
deepdishtj
- E30 Zone Newbie
- Posts: 2
- Joined: Fri May 30, 2008 11:00 pm
hi havent posted on here before!! so i thought i would! is there any 2.0 block that can replace the 318is block. there for making it a 2.0???
-
rix313
- E30 Zone Team Member
- Posts: 4967
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
You can increase the CC by changing the crank shaft, some one has done it before.
-
GrindCulture
- E30 Zone Addict
- Posts: 2955
- Joined: Mon Mar 03, 2008 11:00 pm
- Location: Exeter
In order to get to 2L you'll need to either replace the crank with an M47 item and use M44 pistons, or use S50B30 pistons on the M44 crank. S30B30 pistons with an M47 crank will give 2.1L.
http://www.e30zone.net/e30zonewiki/inde ... roker_Info
http://www.e30zone.net/e30zonewiki/inde ... roker_Info
Not in E30s any more 
-
DHFiS
- Old Skooler
- Posts: 2733
- Joined: Sat Aug 12, 2006 11:00 pm
- Location: cambridge
Crank from the M47 2.0 diesel engine is the onerix313 wrote:You can increase the CC by changing the crank shaft, some one has done it before.
-
Daf318is
- E30 Zone Camper
- Posts: 1260
- Joined: Mon Jul 30, 2007 11:00 pm
- Location: North Wales (Denbighshire)
I looked in to doing this but it get's very expensive, just be warned that the bits to do this will run you up a very big bill!
Daf
Daf
Now driving an E46 320D touring
, but it get's worse..... the new project is going to be Ford powered!-
GrindCulture
- E30 Zone Addict
- Posts: 2955
- Joined: Mon Mar 03, 2008 11:00 pm
- Location: Exeter
The second M42club link I've posted today, I thought I was on my way to curing my 4 pot illness.
http://www.m42club.com/forums/showthread.php?t=6866
Some very helpful info in there about rods, piston shaving, CRs and prices.
http://www.m42club.com/forums/showthread.php?t=6866
Some very helpful info in there about rods, piston shaving, CRs and prices.
Not in E30s any more