Enter a group buy or look here for zone discounts
Moderator: martauto
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Wed Dec 03, 2008 9:09 am
Confirmed list..
1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9.
Like I said, I shall let this run for a few days then order them, so still time to get your names down

-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Wed Dec 03, 2008 9:10 am
gcs325i wrote:Still wanting a set as well
So £75+post and you source the bolts? or £55.22+post and order them my self?
Hello mate, probably easiest to order them from Cotswolds on here, they'll be delivered to your door and 10% discount also

-
DanThe
- E30 Zone Team Member

- Posts: 28641
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
-
Contact:
Thu Dec 04, 2008 11:15 pm
Thats the 10 then
1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 12:10 pm
Excellent, I shall either place the order this afternoon or Mon morning
I will check lead time, and payment arrangements etc etc and pop them up here
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Fri Dec 05, 2008 12:34 pm
I've only just seen this thread, am I too late?
If not...
1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 12:43 pm
Nope, you are fine
Will probably leave it till the Monday, just to give people who don't check this forum often a chance..
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Fri Dec 05, 2008 12:47 pm
Thanks!

Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
DanThe
- E30 Zone Team Member

- Posts: 28641
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
-
Contact:
Fri Dec 05, 2008 1:45 pm
Dan, I dont mind waiting longer if theres a chance of further price reduction for a bigger order? 20 sets? What does everyone think?
I dont look in here to often myself, start a thread in the motorsport/track day, may get some interest from there
-
12345kevin
- E30 Zone Camper

- Posts: 1161
- Joined: Sat Apr 09, 2005 11:00 pm
- Location: Essex
Fri Dec 05, 2008 1:51 pm
1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin
Dan,
Have you got someone lined up to weld them on ? As i'm local they could do 2 at a reduce rate

as I have a spare rear beam.
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Fri Dec 05, 2008 2:02 pm
DanThe wrote:Dan, I dont mind waiting longer if theres a chance of further price reduction for a bigger order? 20 sets? What does everyone think?
I dont look in here to often myself, start a thread in the motorsport/track day, may get some interest from there
I'm in no hurry, and I too don't look at the Group Buys section very often so they are both good ideas in my opinion!

Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 2:07 pm
DanThe wrote:Dan, I dont mind waiting longer if theres a chance of further price reduction for a bigger order? 20 sets? What does everyone think?
I dont look in here to often myself, start a thread in the motorsport/track day, may get some interest from there
Done..
I'll see how it goes over the weekend, if we get a few more it could be worth holding off for a bit
I will ring them today about a price for 20 off
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
-
Contact:
Fri Dec 05, 2008 2:08 pm
keep it running I think we csn get 20 sets.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 2:09 pm
12345kevin wrote:Dan,
Have you got someone lined up to weld them on ? As i'm local they could do 2 at a reduce rate

as I have a spare rear beam.
Kevin, I have enquired about the shop making the tabs doing it for me, BBB have sorted a rear beam for me
Do you know anyone who'd do it, or would you be happy to pop it up for them to do?
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
-
Contact:
Fri Dec 05, 2008 2:16 pm
I have a spare beam too, and iirc simon13 has two spare he mentioned on another thread.
They arn't that much to courier around £10 at most, can't remember who I bought mine from but it didn't cost too much.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
winx
- E30 Zone Camper

- Posts: 1099
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: almost certainly not working on my E30...
Fri Dec 05, 2008 2:59 pm
ahh this was the next thing I was going to look at... I was planning on having a rear beam and arms all built up so it's an afternoon's work to unbolt old setup and put the new on. (basically want to do all the bushes, bearings and brakes and brake lines in one hit.
What do rear beams with trailing arms attached go for?
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 3:03 pm
If you are after a rear beam/arms setup, speak to the lovely gentlemen at Big Bavarian Beauties and I am sure they could sort something for you.
The price would depend on inclusion of calipers etc
I am doing the same as you, so i can just unbolt then bolt it all back up again all shiney and fresh

-
winx
- E30 Zone Camper

- Posts: 1099
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: almost certainly not working on my E30...
Fri Dec 05, 2008 3:07 pm
trying to emulate Ian Haynes?!
I am!
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 3:20 pm
I have a long way to go, to reach those giddy heights, but I am trying my best

-
12345kevin
- E30 Zone Camper

- Posts: 1161
- Joined: Sat Apr 09, 2005 11:00 pm
- Location: Essex
Fri Dec 05, 2008 3:25 pm
Jhonno wrote:12345kevin wrote:Dan,
Have you got someone lined up to weld them on ? As i'm local they could do 2 at a reduce rate

as I have a spare rear beam.
Kevin, I have enquired about the shop making the tabs doing it for me, BBB have sorted a rear beam for me
Do you know anyone who'd do it, or would you be happy to pop it up for them to do?
I'de be happy to drop it off Dan if they are doing yours, would do it myself, but not sure i would be happy with my welding on suspension parts !!!
There's lots of small engineering places near me, but would prefer someone who knows what they are doing as it needs to be alligned correctly I imagine.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 3:30 pm
Yes, the beam needs to be level, along with the tabs. They are happy to do it for me, so I should image they'd be ok with doing others.
I am waiting for a call back from then, so I shall confirm either way
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 3:44 pm
They are happy to weld these tabs on for people
If we get 20 people together the price only becomes like £1 or £2 cheaper for the set, but I guess every little helps
I am going to get some pics together an enquire about the front arb mount strengthening, and solid rear arb clamps also
Also if people want to strengthen their rear arm arb mounts, they are offering strenthening plates for about £12 I think it was
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
-
Contact:
Fri Dec 05, 2008 3:48 pm
Jhonno wrote:They are happy to weld these tabs on for people
If we get 20 people together the price only becomes like £1 or £2 cheaper for the set, but I guess every little helps
I am going to get some pics together an enquire about the front arb mount strengthening, and solid rear arb clamps also
Also if people want to strengthen their rear arm arb mounts, they are offering strenthening plates for about £12 I think it was
deffo want a set of those too.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
Fri Dec 05, 2008 3:55 pm
1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin
-
12345kevin
- E30 Zone Camper

- Posts: 1161
- Joined: Sat Apr 09, 2005 11:00 pm
- Location: Essex
Fri Dec 05, 2008 4:01 pm
1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin + Arb plates
-
winx
- E30 Zone Camper

- Posts: 1099
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: almost certainly not working on my E30...
Fri Dec 05, 2008 4:39 pm
1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin + Arb plates
-
DanThe
- E30 Zone Team Member

- Posts: 28641
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
-
Contact:
Fri Dec 05, 2008 5:05 pm
£1 or £2? Damn, you just cant deal with some people...
1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates
-
caneswell
- E30 Zone Newbie

- Posts: 151
- Joined: Sat Feb 05, 2005 11:00 pm
Fri Dec 05, 2008 7:18 pm
1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell + ARB plates
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates
-
BadDave
- E30 Zone Team Member

- Posts: 6012
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Nr Aberdeen.Scotland(Gods country)
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
-
shorty73
- E30 Zone Regular

- Posts: 383
- Joined: Sat Jun 23, 2007 11:00 pm
Sun Dec 07, 2008 10:06 am
1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell + ARB plates
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates
12a. Shorty73
I'm superstitous

Possibly the ARB plates as well.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
-
Contact:
-
chriskkk
- E30 Zone Newbie

- Posts: 30
- Joined: Mon Oct 13, 2008 11:00 pm
- Location: chesterfield
Mon Dec 08, 2008 7:19 pm
Am i too late ? = sorry for delay, am after the 8 tabs and 4 bolt set
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
-
Contact:
Mon Dec 08, 2008 7:52 pm
1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell + ARB plates
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates
12a. Shorty73
14. chriskkk + Arb plates
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.