Rear Toe/Camber tabs - With price!

[Jhonno]

Confirmed list..

1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9.

Like I said, I shall let this run for a few days then order them, so still time to get your names down

[Jhonno]

Still wanting a set as well

So £75+post and you source the bolts? or £55.22+post and order them my self?

Hello mate, probably easiest to order them from Cotswolds on here, they'll be delivered to your door and 10% discount also

[caneswell]

I'm a definite too please.

It would be rude not to at that price!

[DanThe]

Thats the 10 then


1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe

[Jhonno]

Excellent, I shall either place the order this afternoon or Mon morning

I will check lead time, and payment arrangements etc etc and pop them up here

[DRIFTBOY]

I've only just seen this thread, am I too late?

If not...

1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy

[Jhonno]

Nope, you are fine

Will probably leave it till the Monday, just to give people who don't check this forum often a chance..

[DRIFTBOY]

Thanks!

[DanThe]

Dan, I dont mind waiting longer if theres a chance of further price reduction for a bigger order? 20 sets? What does everyone think?
I dont look in here to often myself, start a thread in the motorsport/track day, may get some interest from there

[12345kevin]

1. Jhonno
2. Bad Dave
3. March109
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin

Dan,
Have you got someone lined up to weld them on ? As i'm local they could do 2 at a reduce rate as I have a spare rear beam.

[DRIFTBOY]

Dan, I dont mind waiting longer if theres a chance of further price reduction for a bigger order? 20 sets? What does everyone think?
I dont look in here to often myself, start a thread in the motorsport/track day, may get some interest from there

I'm in no hurry, and I too don't look at the Group Buys section very often so they are both good ideas in my opinion!

[Jhonno]

Dan, I dont mind waiting longer if theres a chance of further price reduction for a bigger order? 20 sets? What does everyone think?
I dont look in here to often myself, start a thread in the motorsport/track day, may get some interest from there

Done..

I'll see how it goes over the weekend, if we get a few more it could be worth holding off for a bit

I will ring them today about a price for 20 off

[march109]

keep it running I think we csn get 20 sets.

[Jhonno]

Dan,
Have you got someone lined up to weld them on ? As i'm local they could do 2 at a reduce rate as I have a spare rear beam.

Kevin, I have enquired about the shop making the tabs doing it for me, BBB have sorted a rear beam for me

Do you know anyone who'd do it, or would you be happy to pop it up for them to do?

[march109]

I have a spare beam too, and iirc simon13 has two spare he mentioned on another thread.

They arn't that much to courier around £10 at most, can't remember who I bought mine from but it didn't cost too much.

[winx]

ahh this was the next thing I was going to look at... I was planning on having a rear beam and arms all built up so it's an afternoon's work to unbolt old setup and put the new on. (basically want to do all the bushes, bearings and brakes and brake lines in one hit.
What do rear beams with trailing arms attached go for?

[Jhonno]

If you are after a rear beam/arms setup, speak to the lovely gentlemen at Big Bavarian Beauties and I am sure they could sort something for you.

The price would depend on inclusion of calipers etc

I am doing the same as you, so i can just unbolt then bolt it all back up again all shiney and fresh

[winx]

trying to emulate Ian Haynes?!
I am!

[Jhonno]

I have a long way to go, to reach those giddy heights, but I am trying my best

[12345kevin]

Dan,
Have you got someone lined up to weld them on ? As i'm local they could do 2 at a reduce rate as I have a spare rear beam.

Kevin, I have enquired about the shop making the tabs doing it for me, BBB have sorted a rear beam for me

Do you know anyone who'd do it, or would you be happy to pop it up for them to do?

I'de be happy to drop it off Dan if they are doing yours, would do it myself, but not sure i would be happy with my welding on suspension parts !!!
There's lots of small engineering places near me, but would prefer someone who knows what they are doing as it needs to be alligned correctly I imagine.

[Jhonno]

Yes, the beam needs to be level, along with the tabs. They are happy to do it for me, so I should image they'd be ok with doing others.

I am waiting for a call back from then, so I shall confirm either way

[Jhonno]

They are happy to weld these tabs on for people

If we get 20 people together the price only becomes like £1 or £2 cheaper for the set, but I guess every little helps

I am going to get some pics together an enquire about the front arb mount strengthening, and solid rear arb clamps also

Also if people want to strengthen their rear arm arb mounts, they are offering strenthening plates for about £12 I think it was

[march109]

They are happy to weld these tabs on for people

If we get 20 people together the price only becomes like £1 or £2 cheaper for the set, but I guess every little helps

I am going to get some pics together an enquire about the front arb mount strengthening, and solid rear arb clamps also

Also if people want to strengthen their rear arm arb mounts, they are offering strenthening plates for about £12 I think it was

deffo want a set of those too.

[Jhonno]

Rear arm arb mounts strengthening?

[Jhonno]

1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin

[12345kevin]

1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin + Arb plates

[winx]

1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe
11. Driftboy
12. Kevin + Arb plates

[DanThe]

£1 or £2? Damn, you just cant deal with some people...


1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates

[caneswell]

1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell + ARB plates
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates

[BadDave]

Dan

PM'd

[Jhonno]

Ta muchly

[shorty73]

1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell + ARB plates
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates
12a. Shorty73


I'm superstitous Possibly the ARB plates as well.

[Jhonno]

No worries

[chriskkk]

Am i too late ? = sorry for delay, am after the 8 tabs and 4 bolt set

[march109]

1. Jhonno + Arb plates
2. Bad Dave
3. March109 + Arb plates
4. Winx + ARB plates
5. mike_sayer
6. gcs325i
7. E30drifto
8. E30drifto
9. caneswell + ARB plates
10. DanThe + ARB plates
11. Driftboy
12. Kevin + Arb plates
12a. Shorty73
14. chriskkk + Arb plates