my e30 3.6 td project proper driving vid with exhaust page 7
Moderator: martauto
-
BigBavarian
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Mar 03, 2008 11:00 pm
- Location: Essex/Suffolk boarderlands!
Look forward to it mate. Not a bad top speed either with such a big lump up front.
Call me on 07858 151 197 - leave a message if no answer as i am probably busy! Will call you back!
Please email thru the website as not always on the zone for pm's.
Thanks
Richard
Please email thru the website as not always on the zone for pm's.
Thanks
Richard
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
well im chuffed
got the engine in there today and made the engine mounts. the engine sits same angle as the original bmw engine just looks higher up front as its a much longer engine. just needs slight fettling with a hammer to bulkhead for starter to fit only about 10mm though. just gotta mark the sump for oil pan and take engine out for flywheel balancing and finish gearbox mountings and final build for the 3rd and hopefuly last engine install. a few pics






















-
BigBavarian
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Mar 03, 2008 11:00 pm
- Location: Essex/Suffolk boarderlands!
That is one big chunk of engine! Did you have to cut the front panel off to get it in there?
Call me on 07858 151 197 - leave a message if no answer as i am probably busy! Will call you back!
Please email thru the website as not always on the zone for pm's.
Thanks
Richard
Please email thru the website as not always on the zone for pm's.
Thanks
Richard
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
BigBavarian wrote:That is one big chunk of engine! Did you have to cut the front panel off to get it in there?
yeah gonna make a new panel around the engine an unboltable one
-
Baz666
- E30 Zone Addict

- Posts: 3516
- Joined: Fri Feb 29, 2008 11:00 pm
- Location: Ipswich, Suffolk
BigBavarian wrote:That is one big chunk of engine! Did you have to cut the front panel off to get it in there?
I would say so look where the fan is, way passed the bloody lights.
going to be nice when finished.

E46 328ci, sport bumpers, 19" style 95`s
-
town325i
- E30 Zone Team Member

- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
have you had any thoughts on where the rad i going to fit?

-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
just where it needs to fit in front of the fan il then just build a frame around ittown325i wrote:have you had any thoughts on where the rad i going to fit?
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
done a bit of digging my engine is a hr 692 ht exactly same engine code as fitted in an italian sports car covini t40. intercooled and overboost 225 bhp at 4300 rpm 0 - 62 7.5 seconds and top speed of 146 mph in a 1350 kg car. i thought the engine would be well detuned for reliability in a boat
nice to know theres more power available easily if i want it 
-
Blitz
- Married to the E30 Zone

- Posts: 11151
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
Just found out that the military spec Lamborghini LM-003 had the same engine.324td wrote:done a bit of digging my engine is a hr 692 ht exactly same engine code as fitted in an italian sports car covini t40. intercooled and overboost 225 bhp at 4300 rpm 0 - 62 7.5 seconds and top speed of 146 mph in a 1350 kg car. i thought the engine would be well detuned for reliability in a boatnice to know theres more power available easily if i want it
An LM-003 was also built; in fact, it was an LM-002 with a turbo charged diesel engine (HR/692-HT) installed in it, because the military required diesel propulsion. This engine, supplied by VM of Cento, with 3590 cc displacement producing 150 bhp at 4200 rpm and connected to a ZF five-speed gearbox was too underpowered for the heavy vehicle, and the project was abandoned

-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
im not suprised it was underpowered must of weighed 4 ton at least ! im surprised they even tried it tbh. im trying to find an engine dyno power plot for the engine in standard form but cant find one yet ?Blitz wrote:Just found out that the military spec Lamborghini LM-003 had the same engine.324td wrote:done a bit of digging my engine is a hr 692 ht exactly same engine code as fitted in an italian sports car covini t40. intercooled and overboost 225 bhp at 4300 rpm 0 - 62 7.5 seconds and top speed of 146 mph in a 1350 kg car. i thought the engine would be well detuned for reliability in a boatnice to know theres more power available easily if i want it
An LM-003 was also built; in fact, it was an LM-002 with a turbo charged diesel engine (HR/692-HT) installed in it, because the military required diesel propulsion. This engine, supplied by VM of Cento, with 3590 cc displacement producing 150 bhp at 4200 rpm and connected to a ZF five-speed gearbox was too underpowered for the heavy vehicle, and the project was abandoned
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
looks wicked with that engine in the bay 

Considering Selling the Cabby, looks like its gonna go
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
from what else i can gather 692 hi9 is identical except intercooled and thats 170 bhp 260 lbft. im gona defo fit an intercooler in when i make the rad mount up.
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
with an intercooler i should be up to this spec :




-
town325i
- E30 Zone Team Member

- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
if you keep the fan on will you be able to fit the rad where its ment to go?

-
GrindCulture
- E30 Zone Addict

- Posts: 2955
- Joined: Mon Mar 03, 2008 11:00 pm
- Location: Exeter
I think it's going to be one hell of a job to keep that thing cool, let alone work out all the charge cooling gubbins for the turbo. But then again I hightly doubted it would even fit in the bay, but you managed it.
to you, you mentalist!
Not in E30s any more 
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
no the rad mounting is behind the fan now and been cut out anyways. the new rad is 4 times bigger than the original must be 100 mm deep. itl be so easy bit of plate underneath boled to a new crossmember and a mount plate at the top job donetown325i wrote:if you keep the fan on will you be able to fit the rad where its ment to go?
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
dont need to run all that crap on the engine in the pic mate just a 4x4 cosworth intercooler sat next to the rad will be perfectGrindCulture wrote:I think it's going to be one hell of a job to keep that thing cool, let alone work out all the charge cooling gubbins for the turbo. But then again I hightly doubted it would even fit in the bay, but you managed it.to you, you mentalist!
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
looking at the power graph theres loads of torque for 2000 to 3000 revs and with my new crownwheel and pinion just by driving in that rev range will take me from 0 to 102 mph 
-
robbo86
- E30 Zone Addict

- Posts: 3758
- Joined: Fri Jun 15, 2007 11:00 pm
- Location: planet thanet
engine is out again now just gotta finish of gearbox and sump and final engine fit hopefully saturday
To be followed by a frankenstein-like "ITS ALIIIIVVEEEE" moment
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
robbo86 wrote:engine is out again now just gotta finish of gearbox and sump and final engine fit hopefully saturday
To be followed by a frankenstein-like "ITS ALIIIIVVEEEE" moment
i hope so mate if it works.
got gearbox finished today and starter on and sealed at the back. started on the sump got oil pick up relocated and pan resting about where i want it. hopefully have sump finished tmrw if all goes to plan.
tbh im happy with how its going only gearbox giving me slight concerns but it will be geting some testing as soon as its driveable to make sure its going to work ok. spent so far £75 on machining and £20 on a fuel pressure reg. must be knocking on to 100 hours of work time though
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
got sump done and on
few pics












-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
cannot wait to see this in the car
keep up the good work
keep up the good work
-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
Seriously impressive, but so, so much effort. You are obviously fairly skilled, you could have pioneered the first 330D engined e30, instead you have a very heavy underpowered boat anchor!
Keep the pics coming, its certainly a mad project. Respect.
Keep the pics coming, its certainly a mad project. Respect.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
3.0d swap has already been done into a Tech 1!!
-
1an
- E30 Zone Addict

- Posts: 2384
- Joined: Sat Oct 28, 2006 11:00 pm
- Location: benfleet, essex
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
Jon_Bmw wrote:Seriously impressive, but so, so much effort. You are obviously fairly skilled, you could have pioneered the first 330D engined e30, instead you have a very heavy underpowered boat anchor!![]()
![]()
Keep the pics coming, its certainly a mad project. Respect.
electrics on modern engines are way over my head mate. its a headache i cant be doing with. i just hope my sump doesnt leak and my gearbox doesnt fall off
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
this is a test for me tbh ive rebuilt a chevy and a few cat engines but this converting stuff is new to me, has cost £100 so worth a punt for the learning curve i think. im gonna get engine in and make rad mounts tmrw. hopefully should be running in the car by saturday all fingers crossed 
-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
Fair enough! £100, thats pretty good. Are you expecting good things from the economy, or is it just a fun car that is going to plume out black smoke all the time? 
-
BigBavarian
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Mar 03, 2008 11:00 pm
- Location: Essex/Suffolk boarderlands!
Dont think fuel economy will be that bad, you could probably run it on heating oil!
Call me on 07858 151 197 - leave a message if no answer as i am probably busy! Will call you back!
Please email thru the website as not always on the zone for pm's.
Thanks
Richard
Please email thru the website as not always on the zone for pm's.
Thanks
Richard
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
Jon_Bmw wrote:Fair enough! £100, thats pretty good. Are you expecting good things from the economy, or is it just a fun car that is going to plume out black smoke all the time?
just something different its just a car and engine i have lying around and thought id try use them.
-
town325i
- E30 Zone Team Member

- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
he gets free derv tooJon_Bmw wrote:Fair enough! £100, thats pretty good. Are you expecting good things from the economy, or is it just a fun car that is going to plume out black smoke all the time?

-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
well got the engine in today gear lever is in original position. starter is on. im half way through mounting the radiator
il take some pics tmrw shes on a serious nose dive at the minute though
im gona just try it first and make sure everything works ok, if it does then im gonna need some height and dampening adjustable front suspension. im gonna be a dad in about a weeks time im trying to just get it running and moving before shes born as play time will be much less when my daughters here 
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Looking forward to seeing the pics 
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
rad is in and motor is on the key now
tryed manual fuel pressure reg but cant get pressure low enough from fuel pump so gotta replace it with electric lift pump and bolt prop on and try and drive it tmrw










-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
wow, rapid progress made with this
If you do ever decide to move those wheels on let me know as i have a set here but one is quite bent
Do you have to use spacers on the front? Don't suppose you have 5 of the wheels and wanna sell the spare?
If you do ever decide to move those wheels on let me know as i have a set here but one is quite bent
Do you have to use spacers on the front? Don't suppose you have 5 of the wheels and wanna sell the spare?


