Best Stuff for Removing Tree Sap
Moderator: martauto
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Guys
Whats the best gear for removing tree sap normally i just polish till it comes off but does anyone have any tips or suggestions??
Thanks
Neil
Whats the best gear for removing tree sap normally i just polish till it comes off but does anyone have any tips or suggestions??
Thanks
Neil

Considering Selling the Cabby, looks like its gonna go
-
benjy
- E30 Zone Regular

- Posts: 662
- Joined: Mon Jan 02, 2006 11:00 pm
- Location: English Riviera
Dont park under trees!
Sorry, couldnt resist!
Try 'muck off' or I think Mequires do something for it.....
Gaffa tape is like "the force" - it has a light side, a dark side, and it holds the universe together.
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Best way to remove it is by claying the car

-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
knew that was comingbenjy wrote:Dont park under trees!

Considering Selling the Cabby, looks like its gonna go
-
benjy
- E30 Zone Regular

- Posts: 662
- Joined: Mon Jan 02, 2006 11:00 pm
- Location: English Riviera
cliffybabe wrote:knew that was comingbenjy wrote:Dont park under trees!
Had to be said!!
How about traffic film remover??
Gaffa tape is like "the force" - it has a light side, a dark side, and it holds the universe together.
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Chainsaw,apply to tree.. 

-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
sounds good to medaimlerman wrote:Chainsaw,apply to tree..

Considering Selling the Cabby, looks like its gonna go
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
d6dph wrote:Best way to remove it is by claying the car

-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
thats what im doing tomorrow afternoon thend6dph wrote:d6dph wrote:Best way to remove it is by claying the car

Considering Selling the Cabby, looks like its gonna go
-
robbo86
- E30 Zone Addict

- Posts: 3758
- Joined: Fri Jun 15, 2007 11:00 pm
- Location: planet thanet
then definately dont park under the treedaimlerman wrote:Chainsaw,apply to tree..
-
Dan320is
- E30 Zone Squatter

- Posts: 1813
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Cambridgeshire
Washing it with warm/hot water always works for me.
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Thats I would say. If it's only tree sap a wash should do it.Dan325iSport wrote:Washing it with warm/hot water always works for me.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
Cotty
- Hartge Crew
- Posts: 5926
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Orpington, Kent
But a clay bar will also get rid of other crap as well

-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
I'd be suprised if hot water would remove all the sap Trev, Depends on how well protected the surface was before it bonded.B7 wrote:Thats I would say. If it's only tree sap a wash should do it.Dan325iSport wrote:Washing it with warm/hot water always works for me.
You old bus will probably repel dirt with the level of cleanliness you maintain

-
bodger
- E30 Zone Addict

- Posts: 2098
- Joined: Tue Aug 07, 2007 11:00 pm
- Location: cheshire
autoglym intensive tar remover 
-
OBs
- E30 Zone Squatter

- Posts: 1655
- Joined: Thu Nov 02, 2006 11:00 pm
- Location: Torbay, Devon
Tree sap is nasty stuff
At work we use 'clean / neat' thinners
Risky business, but as long as you dont leave it on the paint work long its usually fine
TFR dosnt really work that well, but if you put bits of cloth soaked in TFR on the effected areas it will eventually penetrate it... God the times Ive had to flat and polish roofs and bonnets because some tit has used a brillo pad

At work we use 'clean / neat' thinners
Risky business, but as long as you dont leave it on the paint work long its usually fine
TFR dosnt really work that well, but if you put bits of cloth soaked in TFR on the effected areas it will eventually penetrate it... God the times Ive had to flat and polish roofs and bonnets because some tit has used a brillo pad
-
robbo86
- E30 Zone Addict

- Posts: 3758
- Joined: Fri Jun 15, 2007 11:00 pm
- Location: planet thanet
its basically a bar..... and its made of clayH7AVY wrote:Whats the clay bar?
s'why its called a claybar....
http://www.dtconcours.co.uk/super-clay.htm
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
robbo86 wrote:its basically a bar..... and its made of clayH7AVY wrote:Whats the clay bar?
s'why its called a claybar....
http://www.dtconcours.co.uk/super-clay.htm

Considering Selling the Cabby, looks like its gonna go
-
robbo86
- E30 Zone Addict

- Posts: 3758
- Joined: Fri Jun 15, 2007 11:00 pm
- Location: planet thanet
I'm clever me!!!
-
H7AVY
- E30 Zone Newbie

- Posts: 205
- Joined: Sun Dec 02, 2007 11:00 pm
Yeah well done il post you a blue peter's badge!!!!! 
-
robbo86
- E30 Zone Addict

- Posts: 3758
- Joined: Fri Jun 15, 2007 11:00 pm
- Location: planet thanet
WOOOHOOO!!!
-
HartgeH27
- E30 Zone Team Member

- Posts: 21737
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: Chichester
But MUST be washed first Diddyman !!! Tut tut...............d6dph wrote:d6dph wrote:Best way to remove it is by claying the car
-
chrisdovey1
- E30 Zone Newbie

- Posts: 14
- Joined: Sun Sep 28, 2008 11:00 pm
best stuff ive found for this is chemical guys heavy deagreasant, diluted 1/4. spray on, leave for a couple of minutes. then rub with microfibre wash mitt then wash off with jet wash

