Restoring my Stannard 2.7 Update

Show off your pride and joy here

Moderator: martauto

MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Wed Aug 20, 2008 10:14 am

If this car wasn't an ex mag (small) feature car it may not have quite the appeal, but this one I think is worth saving. I bought the car about 3 months ago, heres the pics from when I bought it. As you can see they're from Pistonheads

Image

Image

I've made a lot of progress on the car since I first picked it up, but only now started the thread.

Maybe restoring is a bit of an exageration, but its way further than I have ever gone with a car before. Any hint of a problem and they normally get PX'd in for something else.
This cars different, as I wanted bit of a project to to get stuck into. Anyway, as you'll see from the photos, its more than I bargained for.......

When I bought the car there was a very slight amount of damp in the passenger foot well. There is a common blocked drainage problem that can cause this, but it can also be bulkhead rust which is a whole lot worse. Generally the car seemed quite rust free in the normal areas, so I wrongly assumed blocked drain.

This is what I found under a shat fibreglass repair
Image

peeled away the shat
Image

Oh dear
Image

I think other E30's have been scrapped because of this as people don't want to be messing about near the main loom

Anyway, out comes the grinder
Image
the rust at the top was all ground away as well, I always take it right back to clean metal

Image

This is just the near side front wheel wheel arch.

This was some real major welding, took 5 plates in total and fair amount of fabrication to get this all patched up. I don't want this turning into a big money resto, hence me making up plates from fresh steel rather than buying expensive panels from BMW. Luckily I get the metal from work :)

Now looks like this from inside
Image

and this from the outside, although now its been seem sealed and undersealed
Image
Last edited by MartC on Wed Feb 04, 2009 12:25 pm, edited 4 times in total.
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Wed Aug 20, 2008 10:18 am

Out comes the entire interior so as I can chase rust, and believe me there is plenty more....
Image

while I was at it removed this bloody mess
Image

now
Image

and bought myself one of these
Image

anyway back to the brown stuff

quite inocent looking patch, maybe just surface
Image

errr maybe not
Image

all welded, nice an solid
Image

another small plate to be welded in
Image

and the finished footwell with some fresh sound deadening
Image#

The other front footwell was a a similar story.
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Wed Aug 20, 2008 10:22 am

Passenger side footwell, another victim of the jacking point water trap

Image

new square plate welded in and floorpan plated.
Image

this has all been seam sealed and undersealed

Again freshly sound deadened
Image

Onto the offside bulkhead. I had seen some rusty trails running down from behind the pedal box. No wet carpet but worth a look. Pedal box was a complete bitch to get out, but worth the effort as it was bit of a mess behind there.

2 plates to patch this up. one at the top and the other you can see cut to shape
Image

Image

While I was doing this job, I noticed another patch of rust up near the strut top mount.

Now repaired and solid again.
Image
Cloud
Mmmmmm Donuts!
Posts: 1584
Joined: Mon Aug 18, 2008 11:00 pm

Post Wed Aug 20, 2008 10:49 am

Great job.
I've got plans to do this myself (when I can find some time/money) so I might bug you for info.
Carpet removal. What a bitch.
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Wed Aug 20, 2008 11:54 am

Feel free to bug me mate, I'm sure there are plenty of otheres on here with way more expeirence than me.

Carpet was a bitch to remove as the underside sticks to the sound deadening over time. And the bit that goes up behind the heater box :roll:

Surprisingly wasn't that bad to put the new one in :?
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Wed Aug 20, 2008 12:07 pm

Wow... seems like a comprehensive job. Outward appearances on E30's can be quite deceptive!

What's the back end like...? Just as bad?

Good write-up / thread too. 8)
User avatar
toby
E30 Zone Addict
E30 Zone Addict
Posts: 3609
Joined: Thu Aug 11, 2005 11:00 pm
Location: Kent

Post Wed Aug 20, 2008 12:12 pm

Great work! What a mission! I have that edition of TBMW and it's good to see cars like these 'under the skin' and also being restored. Top thread!
Image
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Wed Aug 20, 2008 1:15 pm

It is a mission, if I'm honest quite a bit more than I bargained for. I wanted to take the car to Gaydon and the Pod :(

The rear arches aren't too bad, just the lip that returnes inwards has gone a bit on each side.
The off side wheel tub has 3 holes in it, all near the filler neck..... Nice!
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Wed Aug 20, 2008 1:23 pm

Really great and comprehensive job. Most people would have given up or botched it - nice to see one done properly. :D
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Wed Aug 20, 2008 3:25 pm

Les Stannard will be chuffed to hear it's being saved. Well done for taking it on.
B7's Motto. "If it's French, BURN IT!!!!!!"
User avatar
georob
E30 Zone Camper
E30 Zone Camper
Posts: 1106
Joined: Thu Feb 03, 2005 11:00 pm
Location: Aberdeenshire

Post Wed Aug 20, 2008 3:50 pm

Nice work
E34 x 1 - V8 + lots of CF
E30 x 2 - Tourings (1 x M50, 1 x M40)
RS6 C5 - Stage 1 remap - 500bhp

George
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Wed Aug 20, 2008 3:57 pm

nice to see someone saving an e30 instead of breaking them :thumb:
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Wed Aug 20, 2008 7:12 pm

Top work! I remeber the feature. :cool:
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Wed Aug 20, 2008 9:26 pm

Thanks for the positive comments guys :D I'm trying to do a proper job without going nuts and buying lots of BM repair panels, plus this way is probably less intrusive

I spoke to Les Stannard about the car when I first got it, seemed like a really nice chap :) Perhaps he might be interested to see it being saved.
Hyperion
E30 Zone Squatter
E30 Zone Squatter
Posts: 1727
Joined: Tue Jul 12, 2005 11:00 pm
Location: JHB, South Africa

Post Thu Aug 21, 2008 8:04 am

good work, and good luck with the rest. :cool:
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Tue Feb 03, 2009 7:43 pm

Bit of an update chaps. Carrying on from where I left off. The last plate welded in at the front. Offside turret top/inner wing

Image

bit of minor surface rust dealt with near the rad
Image

Moved round to the boot now. Rust, glorious rust :rolleyes: Been a bit slack on this project lately. Loss of interest and crap cold weather.

Confronted with yet another bodged repair. Don't you just love em
Image
Nasty bit of bent ally with some filler splodged in the hole.

Cut out the rust/filler mess and started to weld in some plates.
Image

now all plated up
Image

Still on the rear panel, but now the part the bumper mount attches to
Image

Cut out the rust
Image

and weld in more plate. This was a bitch to form the shape as its all curves
Image

So that part of the rear panel is all done.
Image

Just a small crap repair to deal with near the boot rubber. Plate cut ready to be welded
Image

welded in and smoothed. Its now fillered and painted.
Image

Next to be dealt with is this. Offside rear wheel tub. Bit stumped with this as there is loads of fuel stuff here. Filler neck an numerous pipes fed into a small expansion tank
Image
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Tue Feb 03, 2009 7:52 pm

Nice work fella!
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
m4xos
E30 Zone Addict
E30 Zone Addict
Posts: 2410
Joined: Mon Jan 28, 2008 11:00 pm
Location: Bournemouth

Post Tue Feb 03, 2009 7:55 pm

nice...good work!
you staying the same colour for yor car or changing it?
Last edited by m4xos on Tue Feb 03, 2009 8:09 pm, edited 1 time in total.
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Tue Feb 03, 2009 8:00 pm

looking good dude, ur getting there
Image
Considering Selling the Cabby, looks like its gonna go
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Tue Feb 03, 2009 8:00 pm

Good work :cool:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
MartC
E30 Zone Newbie
E30 Zone Newbie
Posts: 94
Joined: Wed May 14, 2008 11:00 pm
Location: Hemel Hempstead

Post Tue Feb 03, 2009 8:01 pm

Cheaper to stay the same colour, and I did intentionally search for a Dolphin grey. I'm really liking Lachs Silver though
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Tue Feb 03, 2009 8:04 pm

MartC wrote: I'm really liking Lachs Silver though
Good choice winkeye
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 8:29 pm

MartC wrote:Cheaper to stay the same colour, and I did intentionally search for a Dolphin grey. I'm really liking Lachs Silver though
Great to see you've plucked up some enthusiasm to cary on with it.

The car looks more like dophin to me, to dark for lachs?
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Tue Feb 03, 2009 8:40 pm

some great work carried out there Good to see another saved :D

a bit off topic ...
How many Stannard cars exist/were built ?

I had a Good nosy round a black one before xmas over in Leeds (a zoner owns it )
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 8:46 pm

e30topless wrote:some great work carried out there Good to see another saved :D

a bit off topic ...
How many Stannard cars exist/were built ?

I had a Good nosy round a black one before xmas over in Leeds (a zoner owns it )
The "GUG" had a stannard bottom end and there was a tech2 kitted laser blue touring with a stanard 2.7 near me a few years ago.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Tue Feb 03, 2009 9:11 pm

bss325i wrote:
e30topless wrote:some great work carried out there Good to see another saved :D

a bit off topic ...
How many Stannard cars exist/were built ?

I had a Good nosy round a black one before xmas over in Leeds (a zoner owns it )
The "GUG" had a stannard bottom end and there was a tech2 kitted laser blue touring with a stanard 2.7 near me a few years ago.
That tourings still going Barry. Bumped into him in Vines a year or so ago. I think it was Royal blue though. I was talking to Roy Stannard just before xmas re the car. It had a brand new BMW crank in it I believe. Was on the SM stand at Gaydon 3 years ago.

Roy still holds a candle for the M20. Seriously an s14 man now though.

I think Les Stannard holds records for every car they built
B7's Motto. "If it's French, BURN IT!!!!!!"
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 9:16 pm

B7 wrote:
bss325i wrote:
e30topless wrote:some great work carried out there Good to see another saved :D

a bit off topic ...
How many Stannard cars exist/were built ?

I had a Good nosy round a black one before xmas over in Leeds (a zoner owns it )
The "GUG" had a stannard bottom end and there was a tech2 kitted laser blue touring with a stanard 2.7 near me a few years ago.
That tourings still going Barry. Bumped into him in Vines a year or so ago. I think it was Royal blue though. I was talking to Roy Stannard just before xmas re the car. It had a brand new BMW crank in it I believe. Was on the SM stand at Gaydon 3 years ago.

Roy still holds a candle for the M20. Seriously an s14 man now though.

I think Les Stannard holds records for every car they built
Oh yes there is Roys old diamond black tech 1 sport on borbet C's which belongs to a zoner to.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Tue Feb 03, 2009 9:37 pm

bss325i wrote:
B7 wrote:
bss325i wrote: The "GUG" had a stannard bottom end and there was a tech2 kitted laser blue touring with a stanard 2.7 near me a few years ago.
That tourings still going Barry. Bumped into him in Vines a year or so ago. I think it was Royal blue though. I was talking to Roy Stannard just before xmas re the car. It had a brand new BMW crank in it I believe. Was on the SM stand at Gaydon 3 years ago.

Roy still holds a candle for the M20. Seriously an s14 man now though.

I think Les Stannard holds records for every car they built
Oh yes there is Roys old diamond black tech 1 sport on borbet C's which belongs to a zoner to.
that's the one I was looking at the owner has given me first refusal he was almost considering selling ..
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Tue Feb 03, 2009 9:40 pm

this is it
Image
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Tue Feb 03, 2009 9:40 pm

e30topless wrote:
bss325i wrote:
B7 wrote: That tourings still going Barry. Bumped into him in Vines a year or so ago. I think it was Royal blue though. I was talking to Roy Stannard just before xmas re the car. It had a brand new BMW crank in it I believe. Was on the SM stand at Gaydon 3 years ago.

Roy still holds a candle for the M20. Seriously an s14 man now though.

I think Les Stannard holds records for every car they built
Oh yes there is Roys old diamond black tech 1 sport on borbet C's which belongs to a zoner to.
that's the one I was looking at the owner has given me first refusal he was almost considering selling ..
Roy was over the moon that his old car was still out there and mixing in the right circles. Also please that it was still wearing it's Borbets.
B7's Motto. "If it's French, BURN IT!!!!!!"
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 9:43 pm

Note the SM2.7 decal on the rear.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Tue Feb 03, 2009 9:44 pm

In fact i still have the TBMW mag with the feature on Stanard Motors as well as the TBMW mag with Les's car in.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Tue Feb 03, 2009 10:04 pm

bss325i wrote:Note the SM2.7 decal on the rear.
Image
ricey46
E30 Zone Regular
E30 Zone Regular
Posts: 982
Joined: Fri Dec 02, 2005 11:00 pm
Location: Edinburgh

Post Tue Feb 03, 2009 11:50 pm

And I thought my rust hole at the loom grommet was bad 8O Glad you're sorting it though, and a good job too, looking good!! :cool:
Paul.
325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

Image
HartgeH27
E30 Zone Team Member
E30 Zone Team Member
Posts: 21737
Joined: Mon Dec 20, 2004 11:00 pm
Location: Chichester

Post Tue Feb 03, 2009 11:54 pm

Sorry to gatecrash !

What about Ants latests build ?

I now retire !!

Iain