My engine lunched itself yesterday at silverstone. That was the 2nd one of mine, and so far this season from the drivers at least 6 engine bottom ends that I know of have gone. What 5 series used the same engine? My logic is that they may have been less thrashed/better looked after so may source one for a rebuild rather than one from an E30.
Cheers
Brian
Which other models/year used the 2.0 M20 engine?
Moderator: martauto
-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
For sale - E30 320i racer project - sold.
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
The early e34 520i used the m20b20. Are you doing a track day series or would you consider going to a 2.5 lump, would be a massive improvement.
Last edited by Theo on Sun Jul 09, 2006 12:06 pm, edited 1 time in total.
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
1977—a1981 E12 5-series
1977—a1982 E21 3-Series
1983—a1993 E30 3-Series
1988—a1990 E34 5-series
1977—a1982 E21 3-Series
1983—a1993 E30 3-Series
1988—a1990 E34 5-series

-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
Thanks guys, I'm off to do an ebay search
. Has to be the 2.0 Theo, PMBW championship (ex Milltek challenge)
Cheers
Brian
Cheers
Brian
For sale - E30 320i racer project - sold.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
e34 520's will be cained anyway as they need to be to get them to move as the e34 is a heavy car.
I've always found e30 320's to be the most looked after
I've always found e30 320's to be the most looked after
-
calder
- E30 Zone Newbie

- Posts: 129
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Kent
bad luck Brian, good luck getting it sorted for the next race....
calder
