Hey, anyone know if these are replacement kidneys or if they are clip ons?
http://cgi.ebay.com/ebaymotors/BMW-E30- ... enameZWDVW
thanks!
Shadow line kidneys
Moderator: martauto
-
- E30 Zone Regular
- Posts: 775
- Joined: Sun Sep 24, 2006 11:00 pm
- Location: Ireland
This would be a replacement kidney, but you can do the job yourself with a spray can of satin black paint and a wee bit of sanding.
-
- E30 Zone Addict
- Posts: 2164
- Joined: Tue Feb 20, 2007 11:00 pm
- Location: south wales
paint it yourself like everyone else does and spend the money you've saved on sherbert and black-jacks 

Chris


-
- Engaged to the E30 Zone
- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
prime and sprey the whole set of front grills with satin black, that way you get a factory plastic dechrome look with no difference in colour across the grill. thats what i did here:

if you look at that one on ebay the kidney grill look a slightly different colour to the rest of the grill/

if you look at that one on ebay the kidney grill look a slightly different colour to the rest of the grill/
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
- Married to the E30 Zone
- Posts: 9757
- Joined: Tue Mar 01, 2005 11:00 pm
- Location: With Ceiling cat, watching you masturbate.
Halfrauds Satin black is your friend.
-
- Engaged to the E30 Zone
- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
make sure the chrome is realy clean, iv been using 400 grit rotary sander pads to do mine but it think there finer than normal paper so id say about 800 grit or more for hand, use some primer and spery away.
the only chipping problems iv had were when i swung the engine into it.
the only chipping problems iv had were when i swung the engine into it.

2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&