erm 2.5 coolent gremlin???

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
325dude
E30 Zone Regular
E30 Zone Regular
Posts: 266
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jun 06, 2005 7:23 pm

i recently topped up my low coolent when after a couple of days the warning light came on so i checked it again and it wal low there doesnt seem to be any water in the oil but when i pulled out the coolent depth sensor i was covered in a sludgy mud like substance do i have a water /oil leek in the engine or are we talking a cracked head /gasket here any help please get back to me.............j
craigieeb
E30 Zone Addict
E30 Zone Addict
Posts: 4988
Joined: Mon Jan 10, 2005 11:00 pm
Location: In my man cave modifying... something

Post Mon Jun 06, 2005 7:29 pm

hmmmm sound's dodgey to me, it could possably be the head gasgate, have you checked under the oil filler cap to see whats going on in there? and pull the dip-stick out and ckeck the end of it mate, and if you can stick a pic up of the sludge stuff just to see what colour etc etc
M50 Turbo!!! :o I shall say no more :D
User avatar
325dude
E30 Zone Regular
E30 Zone Regular
Posts: 266
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jun 06, 2005 7:35 pm

well the oil cap is fine the dipstick only shows oil no sludge water and the stuff in the expantion tank is just like moist mud dark browney in colour and mud like in consistancy....................j
TOURINGDADDY
E30 Zone Addict
E30 Zone Addict
Posts: 2268
Joined: Sat May 14, 2005 11:00 pm
Location: PORTSMOUTH

Post Mon Jun 06, 2005 7:38 pm

U prob had a block in rad and it has now blowen through... drain it out fill it back up bleed it then run and see what happens...can't do any harm :?
craigieeb
E30 Zone Addict
E30 Zone Addict
Posts: 4988
Joined: Mon Jan 10, 2005 11:00 pm
Location: In my man cave modifying... something

Post Mon Jun 06, 2005 7:41 pm

right just stick some coolant flush in there to give it a good clean out and see what happens after that mate : )

HTH.
M50 Turbo!!! :o I shall say no more :D
User avatar
325dude
E30 Zone Regular
E30 Zone Regular
Posts: 266
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jun 06, 2005 7:46 pm

erm ok i was going to chage the head for on i am building at the moment soon anyway so the head gasket will be getting changed then as the car has done 140000 on the origanal gasket and the cam belt hasnt been cahged since 80000 :cry: ..........j