Its on ! V8 Exhaust system pics Grrrrrrrrrrrr
Moderator: martauto
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Im going to get my exhaust done soon, but going the dual system all the way through, with an H pipe and twin silences.
Whats the BHP on them?
Whats the BHP on them?
-
bmwkieran
- E30 Zone Newbie

- Posts: 5
- Joined: Sun Sep 02, 2007 11:00 pm
Hi ther your doin a good job by looks of it.What engine and box have you used.Also what have you had to do in the break dept.
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
I was thinkin twins but these 1uzfe engines love singles, twins do give a great v8 bark tho! im also keepin the weight down ;)oze30 wrote:Im going to get my exhaust done soon, but going the dual system all the way through, with an H pipe and twin silences.
Whats the BHP on them?
Factory this version of the 1uz puts out about 265hp, mine will be around 300hp +
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Cheers, its a 1uzfe or more well know as a lexus v8, this is a special late version with more tq and power factory so im lucky.Even the older ones still go nuts! trust me, its a supra 5speed boxbmwkieran wrote:Hi ther your doin a good job by looks of it.What engine and box have you used.Also what have you had to do in the break dept.
Nothin as yet for brakes mate, they are lighter engines than the m20 so it really does not need big brakes. Ive got good brake fluids and ebc pads with vented slotted rotors
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
What ahve you done with the servo etc?
I had to ditch mine and run 2 twin M/C's in the car. Means my glovebox is next to useless, but then again, it's just a place for more crap to collect!
I had to ditch mine and run 2 twin M/C's in the car. Means my glovebox is next to useless, but then again, it's just a place for more crap to collect!
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
We actually adapted a large nissan terano m/c to suit, it fits in there a treat and the outlet pipes come out the bottom so there is no clearance issues with the engine or the strut tower, so ive still got the full factory glove boxoze30 wrote:What ahve you done with the servo etc?
I had to ditch mine and run 2 twin M/C's in the car. Means my glovebox is next to useless, but then again, it's just a place for more crap to collect!
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Can you get some pics of the MC setup?
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
that looks sweet
the underside of your ride is so clean
the only thing that sounds better than a beemer 6 is a V8 ..IMO nice work
the only thing that sounds better than a beemer 6 is a V8 ..IMO nice work
-
wullie325i
- CAUTION - unreliable trader!
- Posts: 1398
- Joined: Wed Jul 27, 2005 11:00 pm
that will sound sooooooo nice burbling down the road with everyone turning round to see what it is lol 
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
What about dual 2inch into 2 single boxes into a dual in/out rear box? .. would that be too restrictive?
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
sure, remind me on this post on the weekend and ill sort some out for ya mateoze30 wrote:Can you get some pics of the MC setup?
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Its pretty clea aye, good thing we dont get any rust here! its been very well looked after this car ;)e30topless wrote:that looks sweetthe underside of your ride is so clean
![]()
the only thing that sounds better than a beemer 6 is a V8 ..IMO nice work
Mate i love the sound of a good straight 6, my old oe sounded soooo good but this is the next step lol
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Haha people look very confused when they here then see this car, its so funny. Most people LOVE it but old ladys really hate it haha must scare the shit out of themwullie325i wrote:that will sound sooooooo nice burbling down the road with everyone turning round to see what it is lol
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
You can run duals and they will sound great but i promise you will lose tq and power. You need a y pipe at least or a single imo is best for these type of v8s.oze30 wrote:What about dual 2inch into 2 single boxes into a dual in/out rear box? .. would that be too restrictive?
get twin 2 1/4inch secondaries y piped into a single 2.5inch or imo perfect but VERY hard to find 2.75inch piping, have 1 resonator and a decent muffler on the back it will sound AWESOME all mandrel bends btw
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
spikuzi
- E30 Zone Newbie

- Posts: 122
- Joined: Mon May 14, 2007 11:00 pm
- Location: Melbourne, Australia
good job drifty, lovely car

" ^ it just never ends "
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
There is an H pipe!! Im just worried about dual 2 inch as opposed to dual 2 1/4 or 2.5inch pipes.drifty325i wrote:You can run duals and they will sound great but i promise you will lose tq and power. You need a y pipe at least or a single imo is best for these type of v8s.oze30 wrote:What about dual 2inch into 2 single boxes into a dual in/out rear box? .. would that be too restrictive?
get twin 2 1/4inch secondaries y piped into a single 2.5inch or imo perfect but VERY hard to find 2.75inch piping, have 1 resonator and a decent muffler on the back it will sound AWESOME all mandrel bends btw
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Honestly dual 2 inch pipes wont be that bad at all mate, as i say they will work fine but you could do a little better imo
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Cheers matespikuzi wrote:good job drifty, lovely car
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Any progress on the brake pics??
-
ricey46
- E30 Zone Regular

- Posts: 982
- Joined: Fri Dec 02, 2005 11:00 pm
- Location: Edinburgh
Mate that looks sweet!!
I'm heading over to NZ in about 2 week for my Uncles Wedding at Wellington and Waikawa Bay at Picton. Petty you weren't closer to there I would have liked to have seen it!!

I'm heading over to NZ in about 2 week for my Uncles Wedding at Wellington and Waikawa Bay at Picton. Petty you weren't closer to there I would have liked to have seen it!!
Paul.
325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Bugger! i am actually up that way aroud that time but wont have my car 
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
PICS Riley!!!!!!!

-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Can you measure the width of your heads? I think the BMW one is wider hence being unable to use the booster like yours! Did you move it across at all?
How come the resevoir in the top pic looks further away than on the 2nd one?
I'll try to get a pic of mine when I get back.. There's NO room behind the head!!!
How come the resevoir in the top pic looks further away than on the 2nd one?
I'll try to get a pic of mine when I get back.. There's NO room behind the head!!!
-
ricey46
- E30 Zone Regular

- Posts: 982
- Joined: Fri Dec 02, 2005 11:00 pm
- Location: Edinburgh
Shame about that but not to worry, you'll just need to get a video up of it up on ere then!!! 
Paul.
325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

325i sport Tech1
335i Chromie - Sold
2001 E46 M3-Sold
1999 E39 M5

-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Will do for you my freind.oze30 wrote:Can you measure the width of your heads? I think the BMW one is wider hence being unable to use the booster like yours! Did you move it across at all?
How come the resevoir in the top pic looks further away than on the 2nd one?
I'll try to get a pic of mine when I get back.. There's NO room behind the head!!!
I dunno if it would be the lexus v8 heads are pretty wide to
and yes we did move it across as far as we could go, made new mounts and a longer arm to reach the booster.Fits pretty snug aye
I think that might just be an optical illusion, mate, the M/C sits a little higher than the head
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Could you measure the length of the engine as well..
Cheers
Cheers
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
sweet no probs, will be a few days tho
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
What servo and M/C did you use?
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Drifty.. you there???
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Hi exhaust is looking really good.
I sign of the vids?
I sign of the vids?

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!



