De-Croming Kidneys
Moderator: martauto
Sup my fellow zoners.. oviously its a common fact every1 gets stone chips when driving insanly! well after driving lyka nutter i found my front kidney grill De-Croming and im in need resparying them! jus wanted to knw what spray/ or how to black em out again?? (have i gotta sand em down or summit??)
If it were me mate i would give them a sanding before respraying. If it was one or two small chips id probably use a touch up kit to fill in the gaps. I want to do mine soon... gona get another one though and keep one chrome
-
Hyperion
- E30 Zone Squatter

- Posts: 1727
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: JHB, South Africa
yep as Jay07 said, use a fine sand paper just to etch it, and for the spray paint, you can go to any paint shop or hardware store and get yourself a can of either matt black or glossy black. Which ever catches your fancy.
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
dont de chrome it 

Considering Selling the Cabby, looks like its gonna go
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
a mood grilltari wrote:Its good to have one of each... change them according to your mood lol

Considering Selling the Cabby, looks like its gonna go
-
amble-gamble
- E30 Zone Newbie

- Posts: 26
- Joined: Sun Aug 20, 2006 11:00 pm
I would never have a de-chrome day 
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
another chrome loveramble-gamble wrote:I would never have a de-chrome day

Considering Selling the Cabby, looks like its gonna go
- AlexBaur325
- E30 Zone Regular

- Posts: 685
- Joined: Fri Nov 02, 2007 11:00 pm
+1 i love the chromeness of my baur 
- john-rambo
- E30 Zone Newbie

- Posts: 182
- Joined: Sun May 08, 2005 11:00 pm
what u have to do is sand them down with 800 wet and dry then apply a light to medium coat of Etch primer this contains some kinda acid, this is used normally for priming aluminium and other bare metals but will bite into keyed chrome. once this has dried to the touch paint straight over it with either satin or gloss black hope this helps.
tec 2 man saying NO to chrome bumper and tec 1 wrongness!!!!!!!!!
- b-styling
- E30 Zone Newbie

- Posts: 27
- Joined: Sun Jan 06, 2008 11:00 pm
- Location: Colchester,Eseex
- Contact:
bang on. i own a bodyshop and thats how i'd do it. you can do that with all sorts, ie platics. wiper arms etc but make sure if your doing plastics use a plastic primer and you key up all areas, degrease to prevent reaction with silicone bassed polishes. upol is very good shit for primers and satin blackjohn-rambo wrote:what u have to do is sand them down with 800 wet and dry then apply a light to medium coat of Etch primer this contains some kinda acid, this is used normally for priming aluminium and other bare metals but will bite into keyed chrome. once this has dried to the touch paint straight over it with either satin or gloss black hope this helps.




