As title.. the one for the rear silencer
also with the m30 service kits, is it the same kit if the enginne is still in a 735i? I guess only the fuel filter and air filter might differ..
325i exhaust bracket..
Moderators: martauto, Cotswoldbmw
- zimmerbimmer1
- BMW Parts Meister
- Posts: 2250
- Joined: Sat May 19, 2007 11:00 pm
Exhaust Bracket £25.76Jhonno wrote:As title.. the one for the rear silencer
also with the m30 service kits, is it the same kit if the enginne is still in a 735i? I guess only the fuel filter and air filter might differ..
m30 service kit is same for e32 and e34

- zimmerbimmer1
- BMW Parts Meister
- Posts: 2250
- Joined: Sat May 19, 2007 11:00 pm
water pump is held on by boltsJhonno wrote:ooo also..
nuts for the waterpump housing to head studs.. s50b30

- zimmerbimmer1
- BMW Parts Meister
- Posts: 2250
- Joined: Sat May 19, 2007 11:00 pm
07129908191 £0.15 eachJhonno wrote:07129908191 part number of one of the studs.. need nuts for both.. M7
07129902630 £0.18 each

-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
- Contact:
not where its attached to the head.. it has 2 studs into the head and 2 nuts to screw it onzimmerbimmer1 wrote:water pump is held on by boltsJhonno wrote:ooo also..
nuts for the waterpump housing to head studs.. s50b30
there are 3 bolts holding the housing to the block at the front by the stat tho yeah
- zimmerbimmer1
- BMW Parts Meister
- Posts: 2250
- Joined: Sat May 19, 2007 11:00 pm
to confirm the studs hold item no 4 on this link
http://www.realoem.com/bmw/showparts.do ... g=11&fg=15
this is the water pump
http://www.realoem.com/bmw/showparts.do ... g=11&fg=35
thinkin about it haven't you got a S50 B32????
http://www.realoem.com/bmw/showparts.do ... g=11&fg=15
this is the water pump
http://www.realoem.com/bmw/showparts.do ... g=11&fg=35
thinkin about it haven't you got a S50 B32????

-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
- Contact:
ahh i thought it was the housing..
but yeah, studs hold no4 in that 1st link.. ive mis placed the nuts.. used tb ones on it (m7 still)
its a s50b30 with a b32 head, just to make things complicated ha, same casting tho
but yeah, studs hold no4 in that 1st link.. ive mis placed the nuts.. used tb ones on it (m7 still)
its a s50b30 with a b32 head, just to make things complicated ha, same casting tho

