2.7 sport pics-some drift ones too!

[Kam320i_cab]

dave dont get half out of the car and squirt yourself with water FPML!!

[SHAKEELE30]

yo people let us know when you lot decide to do ur vid, might as come and have look if dats ok wid u lot,

[bebecar]

THAT is a beautiful car! I see you have a Racing Dynamics nadge - is it just the badge (which is nice) or do you have some "add ons" from RD?

I need new badges for mine - but I can't but something else than BMW on it unless I've got the correct modifications - I am so correct


I think I will go for Ac Schnitzer tuning - easy for me to get - and not so expensive as Alpina and Hartge I think.

[Demlotcrew]

THAT is a beautiful car! I see you have a Racing Dynamics nadge - is it just the badge (which is nice) or do you have some "add ons" from RD?

I need new badges for mine - but I can't but something else than BMW on it unless I've got the correct modifications - I am so correct


I think I will go for Ac Schnitzer tuning - easy for me to get - and not so expensive as Alpina and Hartge I think.

His manifold is worth more than some of the cars which pass through this forum.

Andrew

[bebecar]

AND a cool badge

[Karan]

i open the bonnet everday to make sure that damn manifold is still in there!!!!! i luuuuuuuuuuuuuurrrve it, i wanna wrap it but i like the shiny look of it

[Karan]

gave the old girl a clean too (after a couple of months!!) she came up pretty good

well chuffed

[bebecar]

THAT IS THE best looking manifold I've seen on an E30

Doesn't look that much different from the one in my E34 M5, apart from the fact that this one is stainless steel and SHINY

Damn, must have cost a lot!

[Karan]

yeh its a racing dynamics one that has been plated in something.....

i believe it was not shiny in stock form just plain stainless...

ures is prob the same racing dynamics but more common on the e34s.....i dont know of any other e30 with one...or an m20 engine with them

got it 2nd hand-cheers Jit!!!!!!!!!!!!!!!!!!!!!!

lets see a pic of ures!

released a few ponies compared to the other 6 branch i had

[bebecar]

I'll pop out and take a quick shot of the engine bay.... it looks lame next to yours (maybe not lame... more tame probably )

In the meantime here is a picture of Racing Dynamics for a 535


Well that didn't take too long... took a pic of how low the car is as well... my watch is 3.5 cm in "height" on the pic... doesn't leave much room for the sump does it

[Karan]

woah that looks like one from an e28 m5

e34 m5 manifold is very different to that one shown in ure pic?

is that on ure e30? looks like a hartge one or something it does!

please shed some more light as u say u have an e34 m5 but thats not an e34 m5 that has that manifold!

Karan

[bebecar]

woah that looks like one from an e28 m5

e34 m5 manifold is very different to that one shown in ure pic?

is that on ure e30? looks like a hartge one or something it does!

please shed some more light as u say u have an e34 m5 but thats not an e34 m5 that has that manifold!

Karan

Hehe - no no... I HAD an E34 M5 (about two years ago, and an E21 323i + 1977 911 in the meantime until I got the Touring)

The 6 branch in the E34 M5 is quite different but it reminds me of the design on your Racing Dynamics, however I couldn't find a pic on the internet of it Only from the E28...

And yes.. this 6 branch on the pic is on my Touring, I am very interested in knowing what sort it is... it seems to work well and the sound is GREAT.

But from what I gather on the internet the gains from a Racing Dynamics 6 branch like yours is about twice that of an Alpina 6 branch!!! They have dyno graphs for a 19 hp gain - that is so high it must be from both a manifold and a chip or something. Alpina only promises about 7 hp for their manifold.

[Karan]

the bore size is quite a lot bigger on the racing dynamics m20 one compared to an e34 m5 manifold like is on the e34 m5 engine i have sitting in my garage

[Karan]

ure car is lhd right?

that is prob a hartge manifold on ure tourer

[bebecar]

ure car is lhd right?

that is prob a hartge manifold on ure tourer

Yes it is LHD.... it does look similar to the Hartge one.. I guess I will need to find pics of Alpina and Ac Schnitzer as well to be sure...

Your red car will be awesome with this engine... my favorite engine of all the M engines - it is a 3.6 right, not the 3.8?

[Karan]

yeh its a 3.6 315bhp

the m5 i took it out of was very quick..... and sounded unreal

my sport sounds mean though

[bebecar]

yeh its a 3.6 315bhp

the m5 i took it out of was very quick..... and sounded unreal

my sport sounds mean though

I can imagine it sounds mean with this manifold!!! You don't have any sound examples do you?

[Karan]

add me on msn- hpunni@hotmail.com

ill send u some

[nav786]

blimey that manifold is pure sex. never seen anything like it.

[Toby_Unna]

yeah i thought it was the downs, my mate went to bristol uni and one night he nearly rolled his mini on that road with me in it

had a few goes in the m535i round there but it's a bit narrow, much respect

[Karan]

yeah i thought it was the downs, my mate went to bristol uni and one night he nearly rolled his mini on that road with me in it

had a few goes in the m535i round there but it's a bit narrow, much respect

yeh its a tad bumpy and narrow but it sure gets the blood flowing

[glenn]

the bore size is quite a lot bigger on the racing dynamics m20 one compared to an e34 m5 manifold like is on the e34 m5 engine i have sitting in my garage

that's not where that engine is supposed to be!!!!!!!!!!!!!!!!!!

[Karan]

the bore size is quite a lot bigger on the racing dynamics m20 one compared to an e34 m5 manifold like is on the e34 m5 engine i have sitting in my garage

that's not where that engine is supposed to be!!!!!!!!!!!!!!!!!!

its gonna be one quick garage!!! LOL

seriously though... shes going in this weekend for a final fitting and body adjustment.... i may give u a call glenn for advice on the body beating, send u a couple pics or something!

cheers
Karan

[Toby_Unna]

well my advice is make sure you beat the bloody thing far enough that the engine won't touch it anywhere!

taking the whole thing apart and the motor out once you have it all running because the shell's rattling and vibrating is not fun mine was fine when idling in the garage but once it was all finished it was horrible under load and sweet in reverse!

but then i'm sure you'll do it properly unlike me

[greg325]

your car is real clean man, and those drfits are just so clean , you got a superb road there...

[bennyp]

that road looks as though its on the downs in clifton?

mint car too karan

[Karan]

cheers guys

it is the downs yeh! im at uni in bristol

we were thinking of organising a meet on the downs in summer...would be awesome

[bennyp]

if you do organise anything let me know.

i only live down the road from you, its the best bit of bristol that.....

[Karan]

i actually live just of whiteladies road.........nice area yeh..... but too many posh folk LOL

[bennyp]

my girlfreinds sister used to work in the mexican reseraunt at the downs end of whiteladies road.... closed down now though, thinks its a cafe.

ill be coming that way at the weekend, ill have to spend some time "drifting" round the downs!

[bmwe30mtech]

Nice drifting, one handed as well! Great looking 318.

[randomdave325]

that is lookin sweet karan. nice one.
loving those wheels

[/// KAMI]

sum great pics ther dude car also looks nice....

[bss325i]

OLD THREAD ALERT!