I don't know what type it is, but the boot lid spoiler on my car is black plastic/rubber with just a body-coloured cover plate on the top side. It was a very commonly fitted spoiler and seemed to be fitted to almost every non MTech E30 at one time.
I was going to go down the MTech route and fit the whole kit because I rather like everything colour coded. Now I'm not so sure and am not convinced about the shape of MTech2 spoiler in any case. Can I colour mine? It seems a bit soft, so I have doubts about how durable any paint finish would be.
Boot lid spoiler
Moderator: martauto
-
DavieP
- E30 Zone Regular

- Posts: 731
- Joined: Wed Aug 01, 2007 11:00 pm
- Location: South Devon
Dave in Torquay


-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Davie from the description of your spoiler it sounds like an Mtec1 to me?
Personally I dont think the roundness of the Mtec2 suits the boxy E30 shape.
Personally I dont think the roundness of the Mtec2 suits the boxy E30 shape.

-
Scruffymurphy
- E30 Zone Regular

- Posts: 775
- Joined: Sun Sep 24, 2006 11:00 pm
- Location: Ireland
It does sound like a Tech 1. Don't confuse it with the standard SE one. Hold onto it. They're a lovely spoiler. Much nicer than the Tech 2 ones.
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
eko wrote:Davie from the description of your spoiler it sounds like an Mtec1 to me?
Personally I dont think the roundness of the Mtec2 suits the boxy E30 shape.
I agree that the description reads like an MTech1. I'm in the "it's a nicer design" camp too.Scruffymurphy wrote:It does sound like a Tech 1. Don't confuse it with the standard SE one. Hold onto it. They're a lovely spoiler. Much nicer than the Tech 2 ones.
IIRC, it is possible to colour-code the rubber, but personally, I wouldn't.
-
DavieP
- E30 Zone Regular

- Posts: 731
- Joined: Wed Aug 01, 2007 11:00 pm
- Location: South Devon
Cheers guys, an opinion is always gladly received. I'm going to colour the bumpers and 'side swipes', but will leave the spoiler alone. Now you've pointed me in the right direction, I've googled and see that it's an MTech1 rear spoiler. They must have been pretty popular back in the late '80s. For what it's worth, I reckon it's a better looking add-on than the rounded Tech 2 and far more in-keeping with the boxy-body, so I'll stick with it.
Dave in Torquay


-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Good decisionDavieP wrote:Cheers guys, an opinion is always gladly received. I'm going to colour the bumpers and 'side swipes', but will leave the spoiler alone. Now you've pointed me in the right direction, I've googled and see that it's an MTech1 rear spoiler. They must have been pretty popular back in the late '80s. For what it's worth, I reckon it's a better looking add-on than the rounded Tech 2 and far more in-keeping with the boxy-body, so I'll stick with it.

-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
Second that!eko wrote:Good decisionDavieP wrote:Cheers guys, an opinion is always gladly received. I'm going to colour the bumpers and 'side swipes', but will leave the spoiler alone. Now you've pointed me in the right direction, I've googled and see that it's an MTech1 rear spoiler. They must have been pretty popular back in the late '80s. For what it's worth, I reckon it's a better looking add-on than the rounded Tech 2 and far more in-keeping with the boxy-body, so I'll stick with it.

