EML??
Moderator: martauto
-
keggy
- E30 Zone Regular
- Posts: 403
- Joined: Tue May 31, 2005 11:00 pm
- Location: omagh, Northen Ireland
ho wcan you read the eml wihout geting the car plugged in? i heard somthing about a blink code can anyone help me out?
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
I think that only applies to the E36..........
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
keggy
- E30 Zone Regular
- Posts: 403
- Joined: Tue May 31, 2005 11:00 pm
- Location: omagh, Northen Ireland
this is for my e34 wonder if it works on it????
-
d6dph
- Married to the E30 Zone
- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
I'll shift this to other bmw chat then, Tech is only for e30 stuff pleasekeggy wrote:this is for my e34 wonder if it works on it????
-
abelai
- E30 Zone Regular
- Posts: 848
- Joined: Sat Aug 06, 2005 11:00 pm
- Location: Cardiff
Are you refering to fault code reading with the "stomp test" on the accelerator? If so then you can't do it because you don't have an engine warning light in a UK e30. You can wire one up from the c101 connector on the firewall with a 12v 1.2w bulb but obd1 ain't that hot and won't tell you a great deal.
If I can't fix it I'll f**k it up so bad nobody can!!
-
keggy
- E30 Zone Regular
- Posts: 403
- Joined: Tue May 31, 2005 11:00 pm
- Location: omagh, Northen Ireland
its a 95 e34 525 24v not an e30 does the stomp test work on it?
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
EML = Extreme Monetary Loss.
Particularly when that light comes on with a 750i E32.
Particularly when that light comes on with a 750i E32.
-
DanThe
- E30 Zone Team Member
- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
obd1 is sh1t in general, it didnt even notice my cam sensor was unplugged! 