Im using ETA block, m20b20 head
what cam? i have a standard 325i cam sitting would this work ?
what is the difference in duration ?
cheers
mike
2.7 Cam ?
Moderator: martauto
-
chu346
- E30 Zone Addict
- Posts: 2403
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Leicester
Any 325i cam will work, I used a dbilas 272/272 because to car was an auto and I wanted a good idle.
My vote would be to go for a 284/272 then get a custom chip. I don't think any off the shelf chip is going to get the best out of a custom engine.
My vote would be to go for a 284/272 then get a custom chip. I don't think any off the shelf chip is going to get the best out of a custom engine.
-
m-dtech
- Unapproved Trader caution
- Posts: 2068
- Joined: Thu Sep 01, 2005 11:00 pm
i was going to get ant's 2.7 chip and use that while i build my megasquirt.
-
chu346
- E30 Zone Addict
- Posts: 2403
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Leicester
I had one of ant's chips, it 'll do the job for now and be as good as any other chip you can buy.
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
Cat 1300525 ( 273/273 ) cam and A-tech 2.7 chip would work great on that hybrid 
not that I'm biased at all, just the schrick cams are overpriced IMHO and dont offer any gain over the Cat products, indeed both are manufactured from chilled cast billet , and properly hardened as part of the manufacturing process.
not that I'm biased at all, just the schrick cams are overpriced IMHO and dont offer any gain over the Cat products, indeed both are manufactured from chilled cast billet , and properly hardened as part of the manufacturing process.
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
m-dtech
- Unapproved Trader caution
- Posts: 2068
- Joined: Thu Sep 01, 2005 11:00 pm
what is the duration of a standard 325i cam ?