Alloy Products

Post Mon Aug 06, 2007 11:55 am

ooh, shiny bits!

what bits do you do? is it custom stuff or a standard range of bits?

Post Mon Aug 06, 2007 12:32 pm

hi gareth
we are able to do both. if a customer wants to do something different we can fabricate it for them, and we also do "off the shelf" parts. we have just finished an oil seperator catch tank kit for the 325. we sent one to performance bmw mag for there track car and are waiting for them to fit it. we also do polished alloy header tanks for the e30 pre and face lift models, pas tanks, and intercoolers for turbo conversions. we are hoping to use iain (hartage27) car to develop the washer tanks. and perhaps anything else people would want.
we are also looking into developing alloy radiators for 325 and m3 and perhaps rose jointed front suspension arms.

Post Tue Aug 07, 2007 12:07 am

nice!

Post Thu Aug 23, 2007 7:07 pm

Will give you some dates soon Nigel !!!!

Post Thu Aug 23, 2007 8:56 pm

Great to have you guys here.

Can you guys make larger oil coolers for S50 engines?

Evo-S

Post Thu Aug 23, 2007 9:16 pm

custom one that will fit an e30 would be nice.. along the lines of Sals request

them bottom arms sound very interesting

Post Fri Aug 24, 2007 12:41 am

i will be very interested in a alloy header tank !

any prices yet?

Post Fri Aug 24, 2007 1:11 pm

mmm I like the sounds of that, how much are those tanks

Post Sat Sep 01, 2007 6:43 pm

hi we can design and produce oil coolers for any size and nearly any shape. if you want a quote you can fax me a drawing on 01284 388523. and i can price it up. still looking at those bottom arms, think i will be trying them on my own e30 first.
header tank prices are pre face lift Ã‚£120.
post face lift Ã‚£136
oil seperator catch tank Ã‚£70 (i have sent one of these to lydia at pbmw, just waiting for her to fit it and send me some feed back)
pas tank Ã‚£76.
all prices are excluding vat and 10% zone discount.

we are trying to sort washer tanks out at the moment, hopefully using hartage27's car for the prototype ready for the show.

i cant post pics yet, but if i can email them to someone then they could put them up if thats possible. thanks.

Post Sat Sep 01, 2007 7:18 pm

well standard oil cooler size shape etc, just with AN10 pipes on the end.. would that be possible?

Keep us posted bout the bottom arms

Post Fri Sep 07, 2007 5:18 pm

yes that would be possible. if your able to fax or email me an overall size from there i can work out a price. will def keep you posted on the bottom arms.

Post Fri Sep 07, 2007 5:30 pm

can my car be a prototype lol please you can have it for as long as you like !!! 318is

Post Mon Sep 10, 2007 12:08 am

Can you do alloy rads?

Post Mon Sep 10, 2007 12:29 am

alloyproducts wrote:we are also looking into developing alloy radiators for 325 and m3

Post Mon Sep 10, 2007 8:57 am

oil seperator catch tank Ã‚£70 (i have sent one of these to lydia at pbmw, just waiting for her to fit it and send me some feed back)

quote]

what is this what does it do

Post Wed Sep 12, 2007 6:07 pm

I need a rad with a top left and side inlet.

Post Sat Sep 15, 2007 9:08 am

alloyproducts wrote:hi we can design and produce oil coolers for any size and nearly any shape. if you want a quote you can fax me a drawing on 01284 388523. and i can price it up. still looking at those bottom arms, think i will be trying them on my own e30 first.
header tank prices are pre face lift Ã‚£120.
post face lift Ã‚£136
oil seperator catch tank Ã‚£70 (i have sent one of these to lydia at pbmw, just waiting for her to fit it and send me some feed back)
pas tank Ã‚£76.
all prices are excluding vat and 10% zone discount.

we are trying to sort washer tanks out at the moment, hopefully using hartage27's car for the prototype ready for the show.

i cant post pics yet, but if i can email them to someone then they could put them up if thats possible. thanks.

Went to Carrera yesterday and I can personally vouch for the very high standard of workmanship, the attention to detail is awesome.

Nigels work can be seen on my car at the Pod...............you will NOT be dissapointed.

Post Sat Sep 15, 2007 7:19 pm

thanks hartge h27. will send the parts on monday.

i can do a rad with those outlets, am know sorting out e30 325 alloy rads. prices to follow soon.

Post Sun Sep 16, 2007 4:07 pm

alloyproducts wrote: i cant post pics yet, but if i can email them to someone then they could put them up if thats possible. thanks.

I can host a couple of pics ill PM my address

Post Sun Sep 16, 2007 8:23 pm

How about adjustable (camber correction)top mounts like these

Larger image at bottom of the page in following link
http://www.eurocca.net/forums/showthread.php?t=16276

AND
Can you do me a pair of top spring retainers for a 2 1/2" id spring?
It's the only part thats stopping me from getting my coilover conversion done

Dave

Post Mon Sep 17, 2007 11:22 am

hi dave would need a drawing of the spring retainer, measurements ect. have already looked at the top mounts,
quite a bit to them, but if there is enough interest may make a batch up.

Post Mon Sep 17, 2007 6:55 pm

hi guys have just managed to post up some pics of these products in the motorsport section of this site. check them out if your interested.

Post Mon Sep 17, 2007 8:06 pm

alloyproducts wrote:hi dave would need a drawing of the spring retainer, measurements ect. have already looked at the top mounts,
quite a bit to them, but if there is enough interest may make a batch up.

Can get the spring retainers drawn up,with all the measurements,and scanned some time within the next week or so.

Cheers

Post Tue Sep 18, 2007 2:16 pm

alloyproducts wrote:yes that would be possible. if your able to fax or email me an overall size from there i can work out a price. will def keep you posted on the bottom arms.

E-mail sent

Post Tue Sep 18, 2007 11:20 pm

what a job lot discount like ??

Post Wed Sep 19, 2007 2:54 pm

very interested

I'm after a header for pre facelift, but also a washer tank, but I'm not sure if the mountings are the same for pre and post facelift.

anyone able to confirm

Post Wed Sep 19, 2007 2:59 pm

Nigel of Carrera does both as they are different.

Post Wed Sep 19, 2007 3:48 pm

perfect, my next question was which email addy to query, nigel it is.

thanks

Post Thu Sep 20, 2007 11:35 am

kos all our products are hand made to order, not mass produced in a factory. we only offer mass purchase to dealers.

i can offer the same discount as what i offer the vw boys,
10%off for zone members
20% off for a complete set of three main products, i.e washer, header and oil. rad will be included once its finished.

Post Thu Sep 20, 2007 11:37 am

right lads,

where does this oil catch tank go??

Post Thu Sep 20, 2007 11:39 am

we will be having a display in the e30zone marque on sunday at santa pod, for everyone to have a look at what we are able to offer.

Post Thu Sep 20, 2007 3:41 pm

hi green-blood, the oil catch tank is designed for the 325 and any other bmws where the battery has been moved to the boot. they are designed to bolt on to the battery tray.
am still waiting for pbmw mag to fit theres and prodive feedback on there track car.
hope this helps.

Post Thu Sep 20, 2007 4:08 pm

Hi did you get my e-mail re oil cooler?

Post Thu Sep 20, 2007 4:35 pm

cant wait to see the display car