s52

Discuss general engine, turbo and supercharger conversions in this section

Moderator: martauto

Post Reply
User avatar
mrgtsx
E30 Zone Newbie
E30 Zone Newbie
Posts: 82
Joined: Mon Nov 06, 2006 11:00 pm

Sat Sep 15, 2007 9:34 am

guys i have decided to go from a jap 6 to the more traditional m3 engine. now i have looked through countless posts about this conversion what i needed to know was what engine and transmition mounts did you guys use for the install? stock ones or custom its got me stumped thanks :)
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex
Contact:

Sat Sep 15, 2007 12:18 pm

mrgtsx wrote:guys i have decided to go from a jap 6 to the more traditional m3 engine. now i have looked through countless posts about this conversion what i needed to know was what engine and transmition mounts did you guys use for the install? stock ones or custom its got me stumped thanks :)
Assuming you're looking at a UK/Euro spec engine, then it'll be an S50 (either S50B30 or S50B32). The S52 was a US only engine, and was basically a large capacity M52 with lumpy cams and only 240bhp.

Regarding the engine and gearbox mounts. You need to use E28 M5 rubber mounts, and the original E36 S50 alloy mounting arms. Gearbox mounts depend on the gearbox used. If using a regular E36 5 speed box, then the standard E30 gearbox crossmember is used with E36 rubber mounts. If you go for the 6 speed box, you will need to fabricate a custom gearbox crossmember.

Cheers,

Ian.
If it aint broke - Modify it...
User avatar
mrgtsx
E30 Zone Newbie
E30 Zone Newbie
Posts: 82
Joined: Mon Nov 06, 2006 11:00 pm

Sat Sep 15, 2007 4:42 pm

thanks for that info. what is the s50 rated at for hp out of curiosity
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!
Contact:

Sat Sep 15, 2007 4:43 pm

s50b30 is 286bhp

s50b32 is 321.. however 305 is a good figure for a standard one
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Sat Sep 15, 2007 4:44 pm

S50B32 = 320 BHP :D
jaistanley
E30 Zone Addict
E30 Zone Addict
Posts: 2517
Joined: Tue Jan 18, 2005 11:00 pm
Location: Coventry and Essex

Sun Sep 16, 2007 12:45 am

BMW were a little generous with the figures for the S50B32. Again and again people have got 305-310 horses out of theirs in the E36. 320 has been heard of but only rarely.

There's more power to be had but with careful and expensive tuning. They do have bags of torque though and the VANOS keeps it over a wide rev range.

With the BTB manifolds and a nice supersprint exhaust I hope to get 320 horses out of mine but we'll see.

Jai
Image
User avatar
mrgtsx
E30 Zone Newbie
E30 Zone Newbie
Posts: 82
Joined: Mon Nov 06, 2006 11:00 pm

Sun Sep 16, 2007 1:42 am

mm thats sounds very tasty i would be extremely with 300bhp with extractors and a full exhaust system. im used to japanese cars with turbos, so this is going to be a big change for me. i dont even think any of my cars had near 300bhp :P
Post Reply