Hi, i'd like to replace all the old faulty wiring(and plug/etc) to my speed sensor but i carn't tell which plug or terminals i need ?
These bits on there own probobly arn't worth putting an order in with you but i need some other bits so i should be able to get a worth while order together if you can help ?
The car is a 325 touring.
Cheers
Andy
New diff speed sensor plug and crimp(?) terminals ?
Moderators: martauto, Cotswoldbmw
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
- Contact:
- zimmerbimmer1
- BMW Parts Meister
- Posts: 2250
- Joined: Sat May 19, 2007 11:00 pm
Hi There,
Could you possibly let me know the 7 digit number on the connector itself you may need a magnifying glass
or very good eyes.
I can't remember the number or how the connector looks
Could you possibly let me know the 7 digit number on the connector itself you may need a magnifying glass
or very good eyes.
I can't remember the number or how the connector looks

-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
- Contact:
Cool, i'll have a look on sunday and get back to you 
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
- Contact:
[edit]My bad, it was just dirty contacts in the plug not the wiring, used lots of carb cleaner to see if i could get a part number from the plug and it's working fine now.
So please ignore my request for the diff speed sensor plug and crimp terminals, sorry.
[/edit]
__________________________________________________________
Sorry it's taken so long to get back to you, the number on the plug hasn't got enough numbers in it and doesn't show on my ETK ?
1 378 416
I hope the pictures help ?


So please ignore my request for the diff speed sensor plug and crimp terminals, sorry.
__________________________________________________________
Sorry it's taken so long to get back to you, the number on the plug hasn't got enough numbers in it and doesn't show on my ETK ?
1 378 416
I hope the pictures help ?


- zimmerbimmer1
- BMW Parts Meister
- Posts: 2250
- Joined: Sat May 19, 2007 11:00 pm
No worries I now Know the part number 1378417.
Cheers
Cheers

-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
- Contact:
Hi, just to let you know incase you try to send some more of these plug casings out the one i got was the wrong one. Instead of the rounded off corners being on diagonally opposed corners like in the pic above they were both at either the top or the bottom. The electrical terminals that came with the plug casing fit the plug OK and look like they are the right shape but i havn't tried them in the speed sensor yet.
This isn't ment to be a dig, i hope it helps point you in the right direction to finding the right plug casing in the future and if you do find it can i have one !
The plug came with the order relating to this thread below....
http://www.e30zone.net/modules.php?name ... ic&t=85123
This isn't ment to be a dig, i hope it helps point you in the right direction to finding the right plug casing in the future and if you do find it can i have one !
The plug came with the order relating to this thread below....
http://www.e30zone.net/modules.php?name ... ic&t=85123
- zimmerbimmer1
- BMW Parts Meister
- Posts: 2250
- Joined: Sat May 19, 2007 11:00 pm
Thanks for the info


