I need to put my 318IS badge back on my boot, but I want to know exactly where it has to go.
Can someone give me some measurements (i.e. from the top of the boot lid to the top of the badge, side to side etc) or tell me the proper way to do it?
Geo
Need to stick my badge back on!!
Moderator: martauto
-
Chris-W
- E30 Zone Team Member
- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
geo1400
- E30 Zone Regular
- Posts: 275
- Joined: Mon Feb 20, 2006 11:00 pm
- Location: Paphos, Cyprus
Good link Chris, however, if I use the measurements given to install the 318, surely the IS will be too close to the edge?
Or am I missing something...
Or am I missing something...
-
E30Mark
- E30 Zone Team Member
- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
iS badge 22mm from r/h boot edge, 18mm between 318 & is badge all 19mm up from bottom edge.
As per the 325 ix drawing in Mr Warburton's post
As per the 325 ix drawing in Mr Warburton's post
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Chris-W
- E30 Zone Team Member
- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Use the iX measurements.
-
geo1400
- E30 Zone Regular
- Posts: 275
- Joined: Mon Feb 20, 2006 11:00 pm
- Location: Paphos, Cyprus
Thanks guys. It makes sense now... 