Hartge Alloy Wheels - Centre badge(S)

Post Tue Jul 31, 2007 10:26 pm

Hello - does anyone know where to get the stickers for the wheel centres? Thanks in advance.

Post Wed Aug 01, 2007 10:14 am

Try Birds ... send a PM to orangecurry and I'm sure he'll point you in the right direction.

G

Post Wed Aug 01, 2007 11:23 am

I have a few genuine ones. What size and colour are you after?

Post Wed Aug 01, 2007 10:30 pm

hello - They ar 45mm in diameter. They are black & dark grey I woulod say. Please let me know if you have any through pm Ste. Thanks for the replies.

Post Wed Aug 01, 2007 10:31 pm

Try Cotty180 as he's just had some.

Post Thu Aug 02, 2007 2:13 pm

maxfield wrote:Try Cotty180 as he's just had some.

Dave (d6dph) made me up a set

Post Thu Aug 02, 2007 2:17 pm

Try ebay

Post Thu Aug 02, 2007 2:20 pm

tigerbill wrote:hello - They ar 45mm in diameter. They are black & dark grey I woulod say. Please let me know if you have any through pm Ste. Thanks for the replies.

Yep I got your PM mate I'll have a look at what I've got. I've also got various Hartge centre caps too.

Post Sat Aug 11, 2007 9:37 pm

Hi - I'm afraid I've had no luck in getting a set of centre stickers -I tried both Birds & Hartge and they both say that they are no longer available. Ah well so it goes sometimes.

Post Tue May 28, 2013 3:03 pm

hi I too am after a pair of the wheel centres- Birds can find only one!

I have a cunning plan having bought some Hartge stickers from HK and some blank wheel centres that just might fit

will post up after wards

as a backstop- does anyone still have the centres left?

Post Tue May 28, 2013 11:21 pm

guys!

don't buy from ebay unless you want junk!

i still make them. i have one set of 4 at 47mm left for £25

they are the black and grey with the (R) symbol and are literally awesome!!

i have also done previously the black and light blu versions as well without the (R)

i make these to order but the guy who does the doming is a bit old school "rock and roll" and can take a while, but the end product is worth the wait.....

pm me if interested....

check out my other stuff if you haven't already at pukardesigns.com

cheers

Post Thu May 30, 2013 8:04 am

tcbracing wrote:hi I too am after a pair of the wheel centres- Birds can find only one!

I have a cunning plan having bought some Hartge stickers from HK and some blank wheel centres that just might fit

will post up after wards

as a backstop- does anyone still have the centres left?

Yes

Post Fri Jun 14, 2013 12:20 am

45mm harge wheel stickers now back in limited stock....£25 for a set of 4.

"domed for her pleasure"

Post Fri Jul 05, 2013 7:35 pm

My cunning plan takes shape

I have found some SAAB ones that are almost the correct diameter- they need to be taken in a couple of mil to sit right- they fit in the centres fine

have some EBay badges

plan is to get the lot sorted with wheel refurb in August (when I am near the wheel people)

will post the finished articles

Post Fri Jul 05, 2013 7:59 pm

jonny323i wrote:
tcbracing wrote:hi I too am after a pair of the wheel centres- Birds can find only one!

I have a cunning plan having bought some Hartge stickers from HK and some blank wheel centres that just might fit

will post up after wards

as a backstop- does anyone still have the centres left?
Yes

Me too

Post Fri Jul 05, 2013 9:05 pm

Why don't you go on the hartge website and buy a set of 4 caps for 93 euro plus delivery instead ?

Post Fri Jul 05, 2013 9:10 pm

I thought they were nla again last I looked

Post Sat Jul 06, 2013 12:05 am

Topblag wrote:Why don't you go on the hartge website and buy a set of 4 caps for 93 euro plus delivery instead ?

Good luck to that!

Post Sat Jul 06, 2013 10:11 am

I've just been given a staggered set with centre caps!

Post Sat Jul 06, 2013 6:09 pm

Lucky t##t lol lets have a look as your local

Post Sat Jul 06, 2013 6:10 pm

Lucky t##t lol lets have a look as your local

Post Sun Jul 07, 2013 10:13 am

Not sure what i'm going to do with them yet. They need a refurb and they are 5x120 but i'm sure they would look great on an m3.

Post Sun Jul 07, 2013 10:15 am

You got me excited then thought they were 4x100

Post Sun Jul 07, 2013 11:29 am

You don't get "Staggered" 4x100's John.

Post Sun Jul 07, 2013 4:58 pm

brettski wrote:Not sure what i'm going to do with them yet. They need a refurb and they are 5x120 but i'm sure they would look great on an m3.

16" or 17"?

Post Sun Jul 07, 2013 8:34 pm

Rav335uk wrote:You don't get "Staggered" 4x100's John.

Rav, I also held that belief but a fellow h35 owner in Peru is telling me they did make a few sets for the H35. I'm awaiting pics to confirm that they are both one piece and 4 stud.

Not saying you are wrong, just that we both could be.....

Post Sun Jul 07, 2013 9:24 pm

They are 16's mate.

Post Mon Aug 19, 2013 2:26 pm

Dear All
Just returned from Inverness with refurbished 7.5x16 4x100 pcd Hartge Alloys taking up most of boot!

They look A1

But my cunning plan involving SAAB centres machined down to fit the centre bores may not be working 100%!
Like Baldrick's experiences I may have hit a snag

I have left the centres with someone and will report back IDC with pictures

The wheels themselves look absolutely fantastic (well done the Wheel specialist in Inverness)

Post Tue Oct 15, 2013 5:26 pm

Well my cunning plan has sort of worked!

Quite a long time delay as I had to get the wheels to and from Inverness (and they take up a lot of space ) for a complete refurb

Anyway results here - I think they look pretty good?

and

I have a great many "nearly fitting" centre caps I am even now not 100% which ones fitted!