touch up scatch on bumper help

Post Mon Jul 23, 2007 5:15 pm

i had a jagged scratch which i have filled in with touch ....however it looks shite. after reading bout detailing its slightly raised, my q is if after plenty of pc or rotary action to "flat " it down will it look better?

Post Mon Jul 23, 2007 5:27 pm

Hap wrote:i had a jagged scratch which i have filled in with touch ....however it looks shite. after reading bout detailing its slightly raised, my q is if after plenty of pc or rotary action to "flat " it down will it look better?

All you will really do with a PC or Rotary is polish the top of the raised touch up.

You need to wet sand the area with very fine abrasive paper until the surface is level, and then polish it back with the PC/Rotary.

Ian.

Post Mon Jul 23, 2007 5:42 pm

cheers ian thats what i thought may be the answer

Post Mon Jul 23, 2007 5:44 pm

ps it does look crap but wiv wetssand and pc it should defo look better...im thinking maybe i shunt have tried to fill lit in

Post Mon Jul 23, 2007 6:09 pm

would of been better just using a coloured polish to mask it slightly, lik like the ones that come with the touch up sticks, and then polishing it with a porter cable to remove it depending how deep of mask it using differnt polsih's and glazes.

Post Mon Jul 23, 2007 7:34 pm

http://www.langka.com/chip-scratch-repa ... c4b6c86978

this stuff is amazing

patience and follow simple instructions amazing results can be achieved

brilliant for stonechips etc

you need to get a really good match on your touch up and you will be amazed

hth

jon

Post Fri Jul 27, 2007 11:32 pm

fine wet and dry then spray with satin black did both the front and the back on mine looks the dogs bollxxx now