cruise control actuator - where abouts does it fit?
Moderator: martauto
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
can anyone post a photo up of where the actuator fits please, i`m sure it mounts near the airbox somewhere but i can figure out where.
Thanks Matt
Thanks Matt
-
charlE30
- E30 Zone Addict

- Posts: 3818
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Warwick
The actuator bracket bolts to the airbox mounting, I'll post a pic up in 30mins (camera batt dead) 
BMW E30 344i track car 
BMW F31 335d xdrive
BMW F31 335d xdrive
-
Widge
- E30 Zone Addict

- Posts: 3661
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Leeds
Ha ha beat you to it!!! Save you a job CharlE30
The guys who supply the cruise control kits rarely supply the bracket too, I made one out of ali sheet. I must look the proper bracket up on the ETK some time. Any other questions about the cruise fire away


The guys who supply the cruise control kits rarely supply the bracket too, I made one out of ali sheet. I must look the proper bracket up on the ETK some time. Any other questions about the cruise fire away


-
charlE30
- E30 Zone Addict

- Posts: 3818
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Warwick
Nice one widge, won't have to go out in the rain now 
Mine came with a bracket

Mine came with a bracket
BMW E30 344i track car 
BMW F31 335d xdrive
BMW F31 335d xdrive
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
Ok thanks, does it mount the same on early 325i ?
Part number for the bracket is... 41 14 1 902 591
i`ll order that monday, along with the longer screw
for the stalk switch.
Part number for the bracket is... 41 14 1 902 591
i`ll order that monday, along with the longer screw
for the stalk switch.
-
Widge
- E30 Zone Addict

- Posts: 3661
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Leeds
Dunno about the early 325i's.
No worries CharlE30, I just popped out inbetween the hail storms
Let me know how much they charge for the bracket, oh and I just used one of the screws that holds the lower column shroud on for the stalk. Then just get a column screw next time your at the scrappy
No worries CharlE30, I just popped out inbetween the hail storms
Let me know how much they charge for the bracket, oh and I just used one of the screws that holds the lower column shroud on for the stalk. Then just get a column screw next time your at the scrappy
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
oh cool i`ll pinch the column screw off the 325 i`m scrapping 
-
Widge
- E30 Zone Addict

- Posts: 3661
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Leeds
That reminds me actually.... I never did get another screw
Oh well the shroud is still there so
Oh well the shroud is still there so
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
drop me a PM with your address and i`ll pop one in the post
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
is there supposed to be holes in the airbox then to mount this bracket?
also what route does the cable go?
also what route does the cable go?
-
Widge
- E30 Zone Addict

- Posts: 3661
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Leeds
The bracket attaches to the wing side of the air box bracket by one of the air box bolts and onther stud that should be sticking out of the air box bracket. Mine only had a sort of roll pin sticking out but it worked ok to locate my home made bracket.
I put my cable round the back of the header tank then down below the servo in through the bulkhead to the glove box. The actal actuating cable can go any where you like as long as it dosen't ket kinke dor trapped etc...
I put my cable round the back of the header tank then down below the servo in through the bulkhead to the glove box. The actal actuating cable can go any where you like as long as it dosen't ket kinke dor trapped etc...
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
top info mate, i owe u one 
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
The proper bracket only costs a couple of Ԛ£Ã”šÃ‚£'s from the dealer.
For info, on the M3 it actually mounts to the inside of the wing itself, the mouting points are there ready too.
For info, on the M3 it actually mounts to the inside of the wing itself, the mouting points are there ready too.



