The Shitbox has new shoes.

Show off your pride and joy here

Moderator: martauto

munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Mon Jul 16, 2007 10:54 pm

Swapped my old battered dented kerbed 15" borbet type e's (or was it s's) for a set of these...

Image
Image
Image
Image
Image

16" Oz Superleggera's.....

Don't really know much about them except they're bloody light!

Anyone shed any light on them? Good? Bad? Average?

I prefer the look to the 5 spokes and the 16" fills the arches a bit better. They're a bit shiny though (under the mud) so I may spray them satin black.
Image
duke wrote: I could throw a spastic round a corner with better precision
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Jul 16, 2007 11:02 pm

Apparently very good because of the weight. Don't know first hand how stong they are but OZ are a top wheel manufacturer and they superlegera's aren't cheap. A couple of people i know have them on non e30's and have had no problems.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Mon Jul 16, 2007 11:03 pm

Looks quite cool.

I know they are an expensive wheel.
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Mon Jul 16, 2007 11:09 pm

They weigh so much less than the ones that were on there. Was a doddle fitting them.

They're off a civic so the offset isnt spot on but so were the last ones. These ones dont need spacers though so hopefully my wobble will be gone.

Need to see them in daylight to reserve final judgement but I'm pretty pleased with the swap. These ones were rubbing on his car cos of his coilovers so he needed fifteens, step in munky the dodgy dealer... Yes you can have my worthless dented wheels mr civic owner...

winkeye
Image
duke wrote: I could throw a spastic round a corner with better precision
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Mon Jul 16, 2007 11:12 pm

ever heard of that guy who started with a paperclip and swapped it for things, until he ended up swapping a role in a movie for a 3 bed house?

316 engine - Borbets - Superleggera's - bbs lm?? :lol:
Image
duke wrote: I could throw a spastic round a corner with better precision
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Mon Jul 16, 2007 11:17 pm

Only person I know whose wheels are more black than the tyres.
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 12:04 am

:lol:

I've never believed in cleaning tyres, all this tyre shine stuff is a con, tyres dont shine when they come out of the factory so why should they shine now...

BUT, these ones have lived at the end of a mud track for most of their life and they could do with a damn good clean. :o:
Image
duke wrote: I could throw a spastic round a corner with better precision
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Tue Jul 17, 2007 12:08 am

nice one Joe-whatever happened to the banded steels?
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 12:14 am

They'll still happen... anything without a dish I can fit my head in is merely a temporary measure.

But these are better then the borbets and I reckon I've done a rather canny deal so they'll do for now.

As you know, its a 325 so has head issues. First on my list is a new engine (e36 goodness of some kind), second is some coilovers so I can have it offensively low when I want but raise it enough that speedbumps dont break things for everyday use and third is some banded steels.
Image
duke wrote: I could throw a spastic round a corner with better precision
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Tue Jul 17, 2007 12:18 am

munky30 wrote: As you know, its a 325 so has head issues. First on my list is a new engine (e36 goodness of some kind), second is some coilovers so I can have it offensively low when I want but raise it enough that speedbumps dont break things for everyday use and third is some banded steels.
You da man wit da plan :cool:

on its nat king cole, wheels too wide to turn, and a licence loser up front.

It'll Scare small children :D
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 12:23 am

It already does. I made a little girl cry just by starting the engine up in a multi storey.
:twisted:
Image
duke wrote: I could throw a spastic round a corner with better precision
gra325i
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 1914
Joined: Mon Mar 05, 2007 11:00 pm
Location: Montrose-North scotland

Post Tue Jul 17, 2007 12:31 am

:teehee: :teehee:
Image
Image
FOR SALE..14" BBS motorsport wheels x5
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 1:54 pm

Image
Image
Image

Some pics in the daylight. I'm happy. :D
Image
duke wrote: I could throw a spastic round a corner with better precision
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Tue Jul 17, 2007 1:58 pm

mad max, if he has some taste!

top work :cool:
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 2:01 pm

:lol:

I've always wanted a replica 'interceptor' from mad max... :mad:

I want to take it to the car wash! F*cking engine mounts :x
Image
duke wrote: I could throw a spastic round a corner with better precision
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Tue Jul 17, 2007 2:02 pm

I like those wheels, how wide are they? What offset?
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 2:09 pm

err.... civic offset.. et38 iirc. Same as the old ones, but because these ones dont have the balancing weights on the inside rim I dont need spacers so hopefully I will have lost my 85-95mph wobble.

They sit a bit far in the arches but I need that with my ride height so I'm not fussed.

size is.. erm.. 195/45/16.
Image
duke wrote: I could throw a spastic round a corner with better precision
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Tue Jul 17, 2007 2:16 pm

Just to show how much I care, please don't overload the car and/or go too fast. It looks like your load index is only 80.
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 2:17 pm

a what now?

:?
Image
duke wrote: I could throw a spastic round a corner with better precision
1an
E30 Zone Addict
E30 Zone Addict
Posts: 2384
Joined: Sat Oct 28, 2006 11:00 pm
Location: benfleet, essex

Post Tue Jul 17, 2007 2:18 pm

looking good munky, but i did prefer the other wheels.

you going to bring the motor up to the pod in september?
Image

Audi S3 and Racing Puma track car.
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 2:21 pm

doubt it, would like to but the head's on its way out and I have two drift events before then.

If its still alive then yes most probably, but its doubtful.

Orangecurry... they say 195/45 R 16 80 V on the tyres... is that bad?
Image
duke wrote: I could throw a spastic round a corner with better precision
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Tue Jul 17, 2007 2:24 pm

munky30 wrote:a what now?

:?
load index is the number that comes before the speed rating...
munky30 wrote:a who where?

:?
load index is how much weight each tyre can support; it's important. IIRC normal E30 LI is 83? so you should be OK, but a touring might need more and if you packed the rear of the touring you'd be putting an awful lot of stress on under-specced tyres.

Speed rating is the 'V' bit, but I'm sure you knew that.
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 2:27 pm

Nope, I didnt know anything about that :o:

I do now though. :D

Load index of 80 mean I can carry ~450kg

Speed rating V means I can do 149 mph

http://www.blackcircles.com/general/sidewall

They're just cheap no-name tyres from what I can see, but they'll do for now and cant be much worse than the shocking pirelli p6000 deathtraps.
Image
duke wrote: I could throw a spastic round a corner with better precision
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Tue Jul 17, 2007 2:32 pm

I meant how wide are the rims - 7j or 7.5j ??
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Tue Jul 17, 2007 2:33 pm

yes ish - the 450 kg is per tyre, and an E30 touring weighs, what, 1400kgs?
So you've got 400kg left for people/luggage - it's not a huge difference below spec, but just remember the civic is probably a lighter car, and some people fit lower LI because the tyres are cheaper (not made to high spec.)

If you loaded up the back, then the back tyres might be unhappy.
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 3:09 pm

On a weighbridge recently it weighed in at 1245 kgs.

So... erm... maths.... 310kg's per wheel which leaves me with 560kgs. Cant see me putting that much in but I'll be wary of transporting any engines (again) 8O

Theo... no idea how wide they are... will it be stamped on the wheel somewhere?
Image
duke wrote: I could throw a spastic round a corner with better precision
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Tue Jul 17, 2007 5:13 pm

195mm wide
Superlego wheels are cool.
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 5:15 pm

They're like yours with almost all the council removed. :wink:
Image
duke wrote: I could throw a spastic round a corner with better precision
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Tue Jul 17, 2007 5:21 pm

Nah nothing like mine.

Closer to being alpenarse reps!
oldroydsr4
E30 Zone Squatter
E30 Zone Squatter
Posts: 1579
Joined: Tue Oct 25, 2005 11:00 pm
Location: Warwick

Post Tue Jul 17, 2007 8:19 pm

Superleggara's are super light, had a set on my g40.

Believe they are made from magnesium alloy.
tailoutcharlie
E30 Zone Addict
E30 Zone Addict
Posts: 2164
Joined: Tue Feb 20, 2007 11:00 pm
Location: south wales

Post Tue Jul 17, 2007 9:26 pm

iirc the tyre sise to keep the original rolling radius for e30 is 205/50/16, they def look lower profile than my sixteens.


im liking the new look, now spray them to match the car (far too bling at mo winkeye )
I can have it offensively low when I want but raise it enough that speedbumps dont break things for everyday use and third is some banded steels.
cop out winkeye
Chris
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 9:42 pm

yup it really is a cop out. In case you havent seen, I snapped an engine mount clean in two going over a speedbump the other day. :(

I wish I could have it this low all the time but I cant be doing with things like that happening.

Original rolling radius? Explain this to me... sounds like something that would slow my acceleration and make my speedo accurate... I cant have that!

And yes, far too bling :twisted:
Image
duke wrote: I could throw a spastic round a corner with better precision
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 9:43 pm

oldroydsr4 wrote:Superleggara's are super light, had a set on my g40.

Believe they are made from magnesium alloy.
Oooh... does that mean if I pop a tyre off the rim I'll get some uber sparks? :twisted: winkeye
Image
duke wrote: I could throw a spastic round a corner with better precision
tailoutcharlie
E30 Zone Addict
E30 Zone Addict
Posts: 2164
Joined: Tue Feb 20, 2007 11:00 pm
Location: south wales

Post Tue Jul 17, 2007 10:33 pm

yup it really is a cop out. In case you havent seen, I snapped an engine mount clean in two going over a speedbump the other day.
havent been on for couple of days, link to the thread???
Original rolling radius? Explain this to me... sounds like something that would slow my acceleration and make my speedo accurate... I cant have that!
about right, bet it wouldn't affect accelaration that much, not with your diff, mine rides better and slides easier on that sise tyre, will fill your arches nicely, though perhaps too much on your drop lol
And yes, far too bling
:bling: = :gay:

:D
Chris
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Tue Jul 17, 2007 10:55 pm

cant be arsed to find the thread... went over one of those yellow and black bolt on speedbumps. Ever so gently dropped the front wheels over it but still got a nasty bump as they dropped down.

Followed by lots of nasty vibrations and knocking and then found this...

Image
Image

:x

@ tyre size... it would raise the car up a bit... maybe when these tyres wear out I might replace them with the right size... maybe.
Image
duke wrote: I could throw a spastic round a corner with better precision