http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 22616&rd=1
Saw this on ebay and wondered if it would do the same job as the z3 conversion from the zone ...
Slightly less money too, anyone had past experience with any aftermarket shifters from ebay?
May just go with the Z3 one as still looks "original" ...
Short shifter, E30 zone diy or ebay one ... ??
Moderator: martauto
-
Matt_M44is
- E30 Zone Newbie
- Posts: 113
- Joined: Thu May 05, 2005 11:00 pm
- Location: Rayleigh, ESSEX!!
-
E30Adam
- Married to the E30 Zone
- Posts: 8483
- Joined: Sun Dec 19, 2004 11:00 pm
- Location: Bournemouth
- Contact:
Looks a bit shit to me mate.
The Z3 one is the same price, but you'll need to buy bushes too.
For an extra tenner I'd go for the tried, tested and rated Z3 over some ebay tripe, you know what crap comes up on there!!
The Z3 one is the same price, but you'll need to buy bushes too.
For an extra tenner I'd go for the tried, tested and rated Z3 over some ebay tripe, you know what crap comes up on there!!
2.8 Litre M20 powered - Essen Sie meinen Staub biatch
-
Demlotcrew
- E30 Zone Team Member
- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Matt i got the Zone one in mines and its amazing! Go for it dude!
Andrew
Andrew
-
pm9575
- E30 Zone Newbie
- Posts: 84
- Joined: Sun Jan 16, 2005 11:00 pm
- Location: Near Aberdeen, Scotland
DO NOT WASTE MONEY ON THE GLOSSY AD's ON EBAY - Stick with Zone advice and perhaps spend a small amount more.
The aggro this will save is priceless enough.
The item shown all gilt and flash is marketed by several 'power sellers' etc, and does not fit without complication, or will foul the balancer around the end of the prop - which lies immediately beneath the gear linkage.
The aggro this will save is priceless enough.
The item shown all gilt and flash is marketed by several 'power sellers' etc, and does not fit without complication, or will foul the balancer around the end of the prop - which lies immediately beneath the gear linkage.