my tourer project now with 335

Show off your pride and joy here

Moderator: martauto

whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Sun Jun 10, 2007 10:25 pm

just thought i'd upload some pics of my tourer as i work through it
so far i've replaced the front seats with a grey sports leather, welded up the rear storage boxes fitted a 6 button computer and sound deadened the entire floor. I've had to remove the complete front end lights grills front valance etc due to someones bodgy repair so far the car looks like this

Image
Image
Last edited by whipsey on Sun Jul 01, 2007 10:35 pm, edited 1 time in total.
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jun 28, 2007 12:11 pm

Image
Image
couple more
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Thu Jun 28, 2007 12:25 pm

hoorah! have fun and best of British.

Tourings are the new Sport :cool:
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jun 28, 2007 12:26 pm

i've got slightly different headlights on the car
riklusby
E30 Zone Regular
E30 Zone Regular
Posts: 489
Joined: Mon Feb 05, 2007 11:00 pm
Location: Scotland

Post Thu Jun 28, 2007 5:35 pm

Another tourer :D :D

Which headlights did you use there ??
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Thu Jun 28, 2007 5:48 pm

Was it easy to remove and refit the valance without taking the wings off?
Image
duke wrote: I could throw a spastic round a corner with better precision
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jun 28, 2007 5:49 pm

riklusby wrote:Another tourer :D :D

Which headlights did you use there ??
trying to find that out on another thread lol
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jun 28, 2007 5:50 pm

munky30 wrote:Was it easy to remove and refit the valance without taking the wings off?
yeah very just have to move the piece that sits round the front about ten mil to clear the valance
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Thu Jun 28, 2007 5:54 pm

cool. I'm fitting a new one to mine soon as my current one has had a run in with a tyre/cone combo and wont take my is splitter.

Took the one off the breaker but the wings were already off.

Was a bit worried that just pulling the wings out to get it in might bend them :?
Image
duke wrote: I could throw a spastic round a corner with better precision
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jun 28, 2007 6:10 pm

nope just do it very carefully
User avatar
Tonker
E30 Zone Newbie
E30 Zone Newbie
Posts: 2
Joined: Wed Jun 27, 2007 11:00 pm

Post Thu Jun 28, 2007 7:50 pm

This is what mine looks like now... Hope I can fix mine up as good as you have :!:
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jun 28, 2007 8:07 pm

not really done much to it yet i will be picking my 3.5 up this weekend though
Nelly
Gumbo
Gumbo
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Divorce Central

Post Thu Jun 28, 2007 11:00 pm

:cool: another jazzed Tourer to hit the streets soon :mad:
Image

"I F**KING LOVE YOU GUMBO"
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jun 28, 2007 11:07 pm

should sit well along side my other project
Image
:D
Last edited by whipsey on Fri Jun 29, 2007 10:29 pm, edited 1 time in total.
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Fri Jun 29, 2007 10:28 pm

a quick pic of the interior i've found out that the fronts are heated might try and convert them to electric as well if poss
:D Image
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Sun Jul 01, 2007 8:22 pm

:twisted: he he look what i just got
Image
Image
Image
Image
not bad for a freebie :D
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Sun Jul 01, 2007 10:42 pm

just stripped a few more bits off the engine before it got too dark
Image
Image
Image

anyone got any ideas on how to remove the injectors?
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Sun Jul 01, 2007 10:45 pm

pull them out..................gently
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Sun Jul 01, 2007 10:51 pm

tried that they don't seem to want to move i'm going to replace them anyway are bigger injectors available?
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Mon Jul 02, 2007 12:13 pm

got the injectors out and stripped some more
Image
Image
Image
Image
:D
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Mon Jul 02, 2007 8:26 pm

How far are you stripping down ?

Are you rebuilding it ?

Stripping is the easy bit, the hard bit is remembering where/how things go back together ! :)
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Mon Jul 02, 2007 11:22 pm

ideally wanna do a complete rebuild that way i can paint the whole lot block an all :twisted:
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Tue Jul 10, 2007 2:21 pm

had a proper look now it appears to have a fairly new head on it as well as very little wear to the cams etc so i've put the rocker cover back on lol any ideas of what to use for takin the rust off the block?
also the manifold is being a w****r to get off any ideas?
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Wed Jul 11, 2007 10:40 pm

Image
trying to clean the engine block down so i can paint it :cry:
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Thu Jul 12, 2007 2:02 pm

What is the expected power of one of these beasties??

Is it worth it for the increased front end weight?


What suspension and brake upgrades have you made?
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Thu Jul 12, 2007 3:19 pm

1.6-3.5 so i should see a bit of an increase i thnk the m30 has about 218 bhp and loads of torque
so far i've made no changes to the brakes etc as it's not on the road yet but they will hapen i was thing of some 750 calipers etc not to sure yet though
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Thu Jul 12, 2007 4:08 pm

Cool. Cheers mate. Best of luck with it!!!
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Thu Jul 12, 2007 11:51 pm

Rosc0PColtrane wrote:What is the expected power of one of these beasties??

Is it worth it for the increased front end weight?

What suspension and brake upgrades have you made?
about 210bhp and 230lbs in standard form if in fair condition/tune, cam and a chip should see you to about 240bhp

sit the engine as far back as it will go and you'd struggle to tell the difference between an M20/E30 and M30/E30

Just use an after market 6 cylinder sports spring/shocker kit will be fine for the road, all the normal e30 suspension mods(M3 offset TCA bushes/uprated A/R bars/etc) can be done to a 335, just depends how far you want to go
ric325i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1961
Joined: Tue Apr 04, 2006 11:00 pm
Location: Gateshead

Post Fri Jul 13, 2007 9:12 am

dont forget the power figure of a m30 are for a car with2 BIG silencers and 1 or 2 cats....

cats are restrictive......1 single back box is not winkeye

there is a few extra ponies :D

im going for the 1.8 to 3.5 which wil be nice too 8)
Image
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Fri Jul 13, 2007 9:42 am

:cool: :cool:
steerfromtherear
E30 Zone Regular
E30 Zone Regular
Posts: 775
Joined: Thu Apr 28, 2005 11:00 pm
Location: Bridgwater(home) Bristol(work)

Post Sat Jul 14, 2007 1:07 am

That is a m30 out of a e28 as well is it not? More powerful to start 218bhp is correct iirc.
Image
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Sat Jul 14, 2007 11:04 am

that's correct e28 not sure on the year though i think it was from an 87 car
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Fri Jul 20, 2007 1:22 pm

had a dig around and found my extinguisher and two brackets lol at that to the parts waiting to go in
Image
Image
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Fri Jul 20, 2007 1:25 pm

any idea if an m10 starter will fit the m30 as they look pretty much identical do they have a differnt power to them?
Image
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Sat Jul 28, 2007 8:57 pm

right i've given my starter a quick clean up tested it and it's still working fine
Image
before
Image
after