Help , Clutch problems

[Steve-E30]

Have put a new master cylinder and a slave cylinder on the e30 and last night the reservoir where its topped up was nearly empty again
Im losing fluid and have no idea where , Any ideas guys , I bled the system when i put the slave cylinder on and im lost on what to do

[Martinaston]

When you put the new master cylinder on was it an aluminium or a steel one ?

[Steve-E30]

Cant remeber mate as one of the guys at work fitted it , Have checked for leaks and cant see any , Does the slave sit flush to the gearbox or is there a very small gap , As the old one was caked it crap and when the new one was fitted it sits on the gearbox ok and bolts up fine but the nearside has a small gap , Im talking approx 2mm ??

[Steve-E30]

[325icabby]

i had this once! it was the pipe perished on the master cylinder, the juice was running under the carpet so took ages to find!

[Steve-E30]

Checked that mate and nothing , Was one of the first places i checked but cheers for mentioning it
Got me baffled at the mo as im forever topping it up to save the reservoir running dry

[dogcoat]

Have you tried putting the old slave on with the new master. I had a problem where it would not go thru. For some reason this worked. Don't ask why?

[Steve-E30]

Sorted now chaps , Cheers for the replies , Was the fury pipe going to the master , Spoke to ant today about it , Hes one top banana