Southwest Meeting Pics

[tbmw]

dont suppose you'll edit out my understeer shame eh bruce
got it nice and sideways on the way in, then soon as camera rolled it all went pete tong.

did anyone get tonys brush with the hedge on the way to fritzs on tape

looked even better out my side window/mirror as i was trying to work out what was happening behind me

[BIGTKB]

Result of sundays meet I think the LINGLONGS are finally dead (after 10k miles/10months of abuse) can't really complain

[tailoutcharlie]

dont think mine are far behind along with my clutch

damn this dry weather

[BIGTKB]

dont think mine are far behind along with my clutch

damn this dry weather
_________________

My clutch is on its way out too Gotta love the E30 though! LINGLONGS are lethal in the wet, hence the CONSTANT abuse recently. Making the most of not feeling like i'm driving on ice when its just drizzling

[tailoutcharlie]

gotta admit, im impressed with the way the car handled the weekend, 570miles, got bloody hot, wobbled around like a very wobbly thing and still refused to give up!

new shopping list;
some smaller wider wheels
lsd
new clutch
new rear bushes...

and all the crap from the old list

[padi]

tim they arent dead they just need switching from side to side... lol. so whos got the vdeo then???

[munky30]

Result of sundays meet I think the LINGLONGS are finally dead (after 10k miles/10months of abuse) can't really complain

Someone that actually has linglongs!!! I love linglongs... for the single reason that they have a funny name!

I assume they must be sh*te as they're so cheap, but what a name!

I havent checked mine yet... should do really... though I would imagine the outside edge of my fronts probably took more abuse.

Zed has the video..

Where's zed?

Zeds dead baby, zeds dead.

[Rosc0PColtrane]

padi and chris, you have mail.

They look lik emy Kum Ho tyres from last year. Except I cut myself on the steel radials.

Was a fun day!! Wish I'd seen eko's male chicken action!!

[eko]

Nathan,you got a video then?

(Zed PMed me earlier to say his edited videos will be up tomorrow)

[eko]

Was a fun day!! Wish I'd seen eko's male chicken action!!

Well controlled though i might add

[padi]

thanks mate that pic is superb quality defo going to have to buy a decent camera. To bad you can see the slightly different coloured rear wing...

[bangerack]

Someone that actually has linglongs!!! I love linglongs... for the single reason that they have a funny name!

Yea we were talking about your Linglongs on Sunday, here are the pics I took of my Dunlop run flats on my E60 note that these are two different tyres both on the same hub and at about 6 month/5000 mile intervals. The man at the tyre co. said "ooh your a bit harsh with your tyres ar'nt you" I replied I thought as they had'nt "run flat" that there must of been plenty of life left in them.....his face was a picture



Note the steel in the mudflap !!!





I had to stop to look what the knocking was....just a stray bit of the tyre

[Rosc0PColtrane]

Nathan,you got a video then?

(Zed PMed me earlier to say his edited videos will be up tomorrow)

Nah, no vids from me mate.

[Rosc0PColtrane]

thanks mate that pic is superb quality defo going to have to buy a decent camera. To bad you can see the slightly different coloured rear wing...

I bet a p-shop hero could fix it on screen for you..

Why is it slightly different?

[BIGTKB]

gotta admit, im impressed with the way the car handled the weekend, 570miles, got bloody hot, wobbled around like a very wobbly thing and still refused to give up!

German engineering!!! Goes wrong alot but rarely lets you down I haven't got time to write my shopping list

They look lik emy Kum Ho tyres from last year. Except I cut myself on the steel radials.

You're not supposed to stroke them Nathan!

I assume they must be sh*te as they're so cheap, but what a name!

I nearly didn't buy them purely cos of the name but a mate offered me 8 for £170. Would've been rude to turn them down. In their defence , as long as they stay well clear of water, they actually grip quite well. If its wet though, you wheelspin in 3rd@30mph amusing at times.

tim they arent dead they just need switching from side to side... lol.

I was tempted mate but chucked the mims on for now instead (which currently have tyres suitable for a Hummer on) but ...

[BIGTKB]

I replied I thought as they had'nt "run flat" that there must of been plenty of life left in them.....his face was a picture

[munky30]

Someone that actually has linglongs!!! I love linglongs... for the single reason that they have a funny name!

Yea we were talking about your Linglongs on Sunday, here are the pics I took of my Dunlop run flats on my E60 note that these are two different tyres both on the same hub and at about 6 month/5000 mile intervals. The man at the tyre co. said "ooh your a bit harsh with your tyres ar'nt you" I replied I thought as they had'nt "run flat" that there must of been plenty of life left in them.....his face was a picture

And you seemed like such a sensible well balanced chap... now I see you're just a hooligan like the rest of us.

My old car used to do that to a set of fronts every 1500 miles!

Oh and, in a crocodile dundee stylee;

thats not tyre wear.... this is tyre wear...


[/img]

[Rosc0PColtrane]

[tailoutcharlie]

second time i seen that pic and still

[tbmw]

impressive tyre wear munky

[padi]

Why is it slightly different?

not sure mate, was looking at it the other day thinkin im sure thats a slightly different colour and im sure it is in that pic. nevermind. Thats some serious tyre wear, sure mine probably arent far from that now.

[Rosc0PColtrane]

Could be lots of things mate. I wouldn't worry about it in that picture.

I want to see it in the flesh now.

You're coming to Newquay right??

[padi]

cant mate im workin all weekend . i officially hate my job...Lol.

[Rosc0PColtrane]

cant mate im workin all weekend . i officially hate my job...Lol.

Sickie? Holiday? Get cover??

[padi]

cant pull a sickie work for my old man he may notice, and hes the only one who can cover e but hes down in plymouth and cornwall for the sunday and monday, so i guess il be working tuesday through till the saturday after then...

[BIGTKB]

(Zed PMed me earlier to say his edited videos will be up tomorrow)

Any news? I still haven't seen your stylish exit yet. All I saw was your front end nearly take off my front end

[eko]

(Zed PMed me earlier to say his edited videos will be up tomorrow)

Any news? I still haven't seen your stylish exit yet. All I saw was your front end nearly take off my front end

No still not heard frome Bruce but he did say he was under immense pressure with work so............

Your front end?Loads of room(my names not Carl ).
Good exit though eh

[BIGTKB]

(Zed PMed me earlier to say his edited videos will be up tomorrow)

Any news? I still haven't seen your stylish exit yet. All I saw was your front end nearly take off my front end

No still not heard frome Bruce but he did say he was under immense pressure with work so............

Your front end?Loads of room(my names not Carl ).
Good exit though eh

Sorry mate, didn't mean to insult you It was so good, made me have another rip, and I didn't even see it all

[padi]

It was so good, made me have another rip, and I didn't even see it all

it doesnt take much to convice you does it tho tim.

[BIGTKB]

It was so good, made me have another rip, and I didn't even see it all

it doesnt take much to convice you does it tho tim.

What are you saying! You're a bad influence. Take that cruise for example... Westerly roundabout...Need I say more?!?

[padi]

hmmm yeah ok i admit it i may be just as bad as you. Lol.

[ZedOne]

Hi All,

Sorry for the delay on the video!

I've been flat out with a number of jobs to earn some much needed cash!

I have been working on it in my spare time and it is looking quite good so far....

I've never done video editing before, this is my first ever attempt and I am quite pleased with the results at the moment.

I'm over half-way there and hopefully will manage to find time to finish it tomorrow.

Sorry to keep you waiting, but I want it to be quite good....

Regards,

Bruce.

[BIGTKB]

Hi All,

Sorry for the delay on the video!

I've been flat out with a number of jobs to earn some much needed cash!

I have been working on it in my spare time and it is looking quite good so far....

I've never done video editing before, this is my first ever attempt and I am quite pleased with the results at the moment.

I'm over half-way there and hopefully will manage to find time to finish it tomorrow.

Sorry to keep you waiting, but I want it to be quite good....

Regards,

Bruce.

Appreciate you putting in all the effort mate They say good things come to those who wait. and we've waited ages so I guess it's gonna be amazing Looking fwd to it

[ZedOne]

.....and we've waited ages so I guess it's gonna be amazing Looking fwd to it

Unfortunately, 90% of the wait has been me doing other work! I really want to try and get it finished tomorrow!

Eko is going to be having a 'sneak' preview of what I have done so far.....just so he can tell me how shite it really is! (then I might have to start again!)

Anyway - back to work!

Bruce.

[tailoutcharlie]

video editing takes ages mate, i know, i tried. remember you cant rush art


ps cant wait to see what the on car footage looks like, still cant believe you put your camera on his car, thats dedication