Council drop, gay 15's and dents...

Show off your pride and joy here

Moderator: martauto

munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 1:04 pm

My custom wound springs arrived earlier this week so I fitted them and the 'new' wheels (swapped for my old 316 engine).

It's still a bit bouncy as the shocks are normal at the moment... Nowhere near as bad as when it was on the cut ones though and I dont need to worry about them popping out anymore. With a bit of a windfall this week I can get some 60mm ones shortened to work with these springs though so all's good.

Worryingly though the front doesnt appear to be as low as it was... I hadnt noticed until I looked at these pics but it seems to be a bit high at the front compared to the back :? Hopefully its just waiting to settle.

Image

Image

Image

Sorry for the poor quality pics. The guy with the camera had it set to 640x480 mode and apparently doesnt know which way is sideways and which is flat. :roll:

Oh and before any of the cloth cap brigade come along and tell me how dangerous the car is, I couldnt give a flying f*ck. It drifts well like this, Has no body roll at all and looks good imo so crawl back into your bbs lined holes and dont start please.

Oh and the wife is getting herself a little runabout later this week as she now refuses to get in it or let the kids in... so everyone's a winner :woohoo:
Image
duke wrote: I could throw a spastic round a corner with better precision
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Fri May 18, 2007 1:08 pm

yeah munky the front end is so high, make sure you take your altitude sickness pills and some tissue for the bleeding nose our sure to get driving all the way up there! :mad: :mad:

Looks Good tho, I like it :cool:
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
Ziggy
E30 Zone Team Member
E30 Zone Team Member
Posts: 11534
Joined: Mon Jan 10, 2005 11:00 pm
Location: floating round my tin can...

Post Fri May 18, 2007 1:09 pm

:cool: Bad to the bone... gonna look schweet in matt.

You need some smoked headlights in your life though!
E30 in need of wiring loom smoke since April '11...
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Fri May 18, 2007 1:19 pm

You need to make the '1' in your numberplate look like an 'i' :wink:
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
oakey
E30 Zone Addict
E30 Zone Addict
Posts: 4891
Joined: Fri Feb 10, 2006 11:00 pm
Location: Surrey

Post Fri May 18, 2007 1:23 pm

that is a very dangerous car you have there munky! It looks like a deathtrap! I cant believe you drive that thing. tut tut

I like it mate. agree with ziggy about the smoked headlights though (i'll be doing mine soon) :cool:
Is that eyebrows i spot lurking aver the lights?
Image
ZedOne
E30 Zone Regular
E30 Zone Regular
Posts: 390
Joined: Fri Aug 11, 2006 11:00 pm
Location: Bristol

Post Fri May 18, 2007 1:26 pm

munky30 wrote:.... and dont start please.
BBS me thinks? :twisted:

Seriously though......looking sweet in that MaD MaX kinda way!

Get that matt black on and some hubcaps on custom 7" steelies....then you're talking serious attitude! winkeye winkeye

Bruce.
Image

Farewell E30 ownership!!!! :(
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 1:29 pm

320iSE wrote:You need to make the '1' in your numberplate look like an 'i' :wink:
Hadn't thought of that... would be kinda cool... I'll get a white capped screw and bosh it in there lol.

Oakey - Yup it has eyebrows. Courtesy of Eko.

March - It looks high compared to the back. But I just went out and looked at it again and I think its a trick of the camera... looks level in real life.

Ziggy - I did have a set of d.i.y smoked ones but I did a very bad job of it and they ended up looking atrocious. I'm going to stick a set of those ebay jobbies where the glass is actually smoked in instead of the diy route. But thats down on the list now as a new engine (another one :roll: ) is on the cards....
Image
duke wrote: I could throw a spastic round a corner with better precision
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 1:32 pm

ZedOne wrote:
munky30 wrote:.... and dont start please.
BBS me thinks? :twisted:

Seriously though......looking sweet in that MaD MaX kinda way!

Get that matt black on and some hubcaps on custom 7" steelies....then you're talking serious attitude! winkeye winkeye

Bruce.
At drift days I use the old steels with hubcaps, 14" with the caps sprayed black... and it does look kinda cool in an odd way...

big fat wide 7" steels would look awesome though :lol:
Image
duke wrote: I could throw a spastic round a corner with better precision
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Fri May 18, 2007 1:33 pm

Looked like a trick of the camera, combinaiton of shit tarmac and yellow lines.

I like it
Ziggy
E30 Zone Team Member
E30 Zone Team Member
Posts: 11534
Joined: Mon Jan 10, 2005 11:00 pm
Location: floating round my tin can...

Post Fri May 18, 2007 1:37 pm

munky30 wrote: Ziggy - I did have a set of d.i.y smoked ones but I did a very bad job of it and they ended up looking atrocious. I'm going to stick a set of those ebay jobbies where the glass is actually smoked in instead of the diy route. But thats down on the list now as a new engine (another one :roll: ) is on the cards....
Yeah, 3.5's clearly the most important, but those lights do need sorting.
Smoked glass sounds like a blimmin stupid way of doing things - how 'bout getting Malc (tylerma) to make you some? He was selling em a while ago... I'd do you some myself, but I haven't got time for anything at the mo. What went wrong with your attempt?
E30 in need of wiring loom smoke since April '11...
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Fri May 18, 2007 1:46 pm

Munky, You bring shame to the zone, I wouldn't trust my family in that. Now be a good lad and put some 15" bbs wheels on and some std springs.





Looks great dude. :snigger:
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 1:48 pm

I didnt bother sanding down the reflector and the paint all peeled off, the 'thingies' came loose and I used no more nails to seal the lense back on, then found out it releases vapour as it dries so they steamed up.

Oh and it also dries f***ing solid so I cant get the lenses off again to re-do them.

The smoked glass ones are e-marked and apparently legal..
Image
duke wrote: I could throw a spastic round a corner with better precision
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 1:50 pm

d6dph wrote:I wouldn't trust my family in that.
Funnily enough thats pretty much what the wife said. But me going in it is fine!

I said good... my daughter has developed an annoying tendency to vomit after about 5 minutes in any car and the baby seats spoil the bad boy image I try to project. :roll:
Image
duke wrote: I could throw a spastic round a corner with better precision
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Fri May 18, 2007 3:39 pm

munky30 wrote:
d6dph wrote:I wouldn't trust my family in that.
Funnily enough thats pretty much what the wife said. But me going in it is fine!

I said good... my daughter has developed an annoying tendency to vomit after about 5 minutes in any car and the baby seats spoil the bad boy image I try to project. :roll:
Give her a hayfever tablet. Antihistemine is used for motion sickness and in sleeping tablets, so should work a treat, unless you get non drowsy ones!
tbmw
E30 Zone Regular
E30 Zone Regular
Posts: 681
Joined: Mon Jan 10, 2005 11:00 pm
Location: weston super mare

Post Fri May 18, 2007 4:08 pm

i quite like that munky

trying to place where in plym the pictures were taken though
Image
A clear conscience is a sign of a bad memory
dom-1984-320i
E30 Zone Camper
E30 Zone Camper
Posts: 1246
Joined: Tue May 16, 2006 11:00 pm
Location: Sunny Essex

Post Fri May 18, 2007 4:16 pm

Looks very cool mate, lookin forward to seeing it when you have it all done in matt. proper smart! :cool:
old_skool
E30 Zone Team Member
E30 Zone Team Member
Posts: 3405
Joined: Fri Sep 01, 2006 11:00 pm
Location: Glossersure

Post Fri May 18, 2007 5:55 pm

Sorry mate, you can do better than that.




Still, when you put the M30 in there that will bring it down a bit.....


:clin:
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Fri May 18, 2007 6:12 pm

munky30 wrote:
d6dph wrote:I wouldn't trust my family in that.
Funnily enough thats pretty much what the wife said. But me going in it is fine!

I said good... my daughter has developed an annoying tendency to vomit after about 5 minutes in any car and the baby seats spoil the bad boy image I try to project. :roll:
which is why you need a sensible family car for the wife and kids or easy wipe leather seats and black windows so no one can see the baby seats winkeye my kids have never beeen in my touring yet ,the wife has a nice sensible audi a4 for that. :D
Last edited by fuzzy on Fri May 18, 2007 8:22 pm, edited 1 time in total.
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 7:22 pm

old_skool_2002 wrote:Sorry mate, you can do better than that.




Still, when you put the M30 in there that will bring it down a bit.....


:clin:
There's not much room for it to come down any more... its pretty much on the stops already :twisted:

Fuzzy - I'm on the hunt for something along those lines at this very moment in time...
Image
duke wrote: I could throw a spastic round a corner with better precision
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Fri May 18, 2007 8:16 pm

looking good :cool:
boxclever1753
E30 Zone Camper
E30 Zone Camper
Posts: 1447
Joined: Sat Feb 17, 2007 11:00 pm
Location: Bristol, UK.

Post Fri May 18, 2007 8:19 pm

i think it needs to be scrapped 8)
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 8:26 pm

Ah well. you cant win em all.
Image
duke wrote: I could throw a spastic round a corner with better precision
aceraf
E30 Zone Addict
E30 Zone Addict
Posts: 3005
Joined: Tue Feb 13, 2007 11:00 pm
Location: Derby

Post Fri May 18, 2007 10:16 pm

Custom wound springs??? where, how much and what drop????

car's looking good...front definately needs dropping a bit more!
**LPG E39 Spares or Repairs for Sale**
Image
Breaking 325i Touring
HUSSAIN
E30 Zone Newbie
E30 Zone Newbie
Posts: 207
Joined: Mon May 30, 2005 11:00 pm
Location: NOTTINGHAM

Post Fri May 18, 2007 10:22 pm

cars looking spot on with that drop.

a quick question as youve dropped your ride...ive got 45mm lowered springs in my car if i wanted to go for
a 60mm drop will i need to get shorter shocks?
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Fri May 18, 2007 10:25 pm

Looking sweet Munky :cool:
Needs a lower front skirt on it winkeye

PS Where in Plymouth are you?
Down your way tomorrow doing Bazmans springs :)
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 11:25 pm

HUSSAIN wrote:cars looking spot on with that drop.

a quick question as youve dropped your ride...ive got 45mm lowered springs in my car if i wanted to go for
a 60mm drop will i need to get shorter shocks?
Manufacturers recommend getting shorter shocks with any more than a 40mm drop.

Afaik the shortest off shelf shocks you can get for the e30 (except coi,lovers) are 60mm.

I'm on standard shocks (on the bumpstops almost and the ride is bad, very bouncy) so I'm getting 60mm ones and having them shortened by an engineer type place.

Aceraf - www.coilsprings.co.uk £150.

Eko - I'm down in devonport but if you give me a call when you're on the way there (with a postcode so I can find my way) I'll pop up, I need to swap my rad so I wont be much use but a mutual e30 repair session could be in order. Dont suppose you or baz happen to have a spare working viscous coupling and a big-ass spanner?
Image
duke wrote: I could throw a spastic round a corner with better precision
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Fri May 18, 2007 11:38 pm

Munky,PM on its way!
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Fri May 18, 2007 11:52 pm

ditto. :wink:
Image
duke wrote: I could throw a spastic round a corner with better precision
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat May 19, 2007 12:16 am

Oh and eko... plan is to fit a breyton rear valance, SE side skirts and a 318is lip spoiler.

I was going to go for the tech 2 look but there's no room. :mad:
Image
duke wrote: I could throw a spastic round a corner with better precision
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Sat May 19, 2007 12:19 am

munky30 wrote:Oh and eko... plan is to fit a breyton rear valance, SE side skirts and a 318is lip spoiler.

I was going to go for the tech 2 look but there's no room. :mad:
........but what happened to `project cheapskate`?
All this dollar your spending kind of defeats the object doesnt it?

E30`s,addictive eh winkeye
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat May 19, 2007 12:25 am

dollar?!

The wheels were swapped for the old 316 lump which was going to get weighed in.

The 325 lump I was given that died has made me £170 which has almost covered the £200 I paid for the good 325 lump.

The new rad cost £25, exhaust was £30 including the welding for the mot, springs were £150.

so... £240 for the car, plus all that = £475.... not bad going for a close ratio 325 heap. Oh and about 30 quid in bushes and track rod ends.

SE skirts will be costing me 30 quid, breyton valance is coming from firefly when he takes it off for about the same... haven't found the IS spoiler yet...

It all falls to pieces when I start adding up how much the M30 will cost to fit but that will be well worth the pennies :D
Image
duke wrote: I could throw a spastic round a corner with better precision
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Sat May 19, 2007 12:26 am

:P
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat May 19, 2007 12:27 am

Not to mention the 20 or so cans of matt black I'l use when I spray it next weekend :twisted: That'll be another 30 quid for a respray :twisted:
Image
duke wrote: I could throw a spastic round a corner with better precision
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Sat May 19, 2007 12:29 am

munky30 wrote: That'll be another 30 quid for a respray :twisted:
:lol:

(Trago Mills,£1.29 a can winkeye )
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat May 19, 2007 12:32 am

Yeah but add the petrol it will cost me to get there (plus how much I loathe the place) and the £1.50 a can I pay from motorworld in plym evens out..

I guess I should add the £3 for the 'paint repair kit' I'll have in my boot (one can of satin, one can of matt)...
Image
duke wrote: I could throw a spastic round a corner with better precision