just wanted to ask if there are any tips or tricks i should know about when removing the front seats in my car, is it just a case of unbolting them or is there anything else?
might want to get under the car with some WD as the rear bolts for the seat and the seat belt runner go through the floor ,what i did was turned the bolts one turn and then gave it a good spray from the top to allow it to run down the threads .came back after a beer and they came out a treat
make sure you lift the seat forward by pushing the reclining lever down to get at the rear bolts. Took me 15 minutes and scraped knuckles to figure it out