polished inet manifold! finished for now! (had enough!)
Moderator: martauto
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
dude looks fat as, Now what about the TB and the AFM casing??? 

Considering Selling the Cabby, looks like its gonna go
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
i never removed it from the car- i drive it everyday so that wasnt an option. I just made sure i covered up evevrythig else and hoovered all the aluminium shavings.
im not gonna polish anything else cliffy i dont think. i dont wanna go overboard! the TB is going to be hammerite met black- same as afm and master cyl.
I would do it again but i'd get myself as many drill attatchments as possible.
im not gonna polish anything else cliffy i dont think. i dont wanna go overboard! the TB is going to be hammerite met black- same as afm and master cyl.
I would do it again but i'd get myself as many drill attatchments as possible.

-
jamesh1977
- BEWARE Zone Thief
- Posts: 458
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: central scotland
lookin good and given me ideas ive got a painted inlet and rocker cover to fit might go down this route with the ones that come off

-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
so all you used was a wire brushe drill attachment and some wet n dry? 
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
yup. thats all and some very harsh sand paper. its not difficult but its time consuming.blingsta wrote:so all you used was a wire brushe drill attachment and some wet n dry?
i'm seriously contemplating polishing my ENTIRE wheels.

-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
at what stage was the sand paper used? after the wire brush or b4?
-
Greeny
- E30 Zone Regular

- Posts: 706
- Joined: Sun Oct 29, 2006 11:00 pm
- Location: Llangollen, North Wales
Now you've done it!
I'm now going to have to do mine.
Looks MINT!
I'm now going to have to do mine.
Looks MINT!

Gone but not forgotten.
('92 325i Cabriolet)
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
after the wire brush.blingsta wrote:at what stage was the sand paper used? after the wire brush or b4?
one tip- dont keep the wire brush in the same place for too long as it sort of melts the metal.

-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
How will you stop it corroding though?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
cheers oakey !!
as for the corroding ^, i suppose metal polish will see to that
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
meguars metal polish dude! works wonders and protects for a long time. i only polish my wheels once a week or so now with this stuff and there is no corrosion on them yet.320iSE wrote:How will you stop it corroding though?
i could lacquer it though i suppose, may be easier in the long run

-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
Looks good i had the job of cleaning a rocker cover just used a wire drill attatchement and off i went then to sand paper then wire wool got a nice finish.
Cliffy i'm guessing thats gazzas work.

Cliffy i'm guessing thats gazzas work.

-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
yepmaxfield wrote: Cliffy i'm guessing thats gazzas work.![]()

Considering Selling the Cabby, looks like its gonna go
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
I reckon Chromybabe will be well jelous(?) of that manifold...
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
who's chromybabe??, do u mean me?daimlerman wrote:I reckon Chromybabe will be well jelous(?) of that manifold...

Considering Selling the Cabby, looks like its gonna go

