MiM 1900s 15x7" ET25

[Two_Sheds]

Been offered a set of these to part exchange for my MiM 2900s (which I couldn't get to fit up front). Just wondering, do the 1900s need any spacers and/or modifcations (grinding TRE/caliper) to fit on a 325?

Cheers

[topspark]

ET 25 is correct offset for the E30 so they will fit straight on matey.

lee

[ed325i]

Mine have got ET25 on them and I had to use 20mm spacers on the front.

[Two_Sheds]

Really? Arse! Anyone else using spacers to get these on, as they seem to be quite a common wheel....

[StuBeeDoo]

ET 25 is correct offset for the E30 so they will fit straight on matey.

Not for MiM 1900's it isn't. Even the et13 version has no more than a couple of mm clearance on the front calipers.

[topspark]

ET 25 is correct offset for the E30 so they will fit straight on matey.

sorry i stand corrected

lee

[liam012]

for some reason my mim 1900 et25 will not clear the front caliper but the et13's do?? they are genuine too. i cant figure it out, were e21 mims different to e30 mims?

[orangecurry]

you need to know the offset AND the width of the wheel before you can say if it should fit.

[dazleeds]

for some reason my mim 1900 et25 will not clear the front caliper but the et13's do?? they are genuine too. i cant figure it out, were e21 mims different to e30 mims?

not sure what et e21s were but theyre deffo different to e30s
tried this before with some e21 wheels and they wouldnt go on mine

[StuBeeDoo]

for some reason my mim 1900 et25 will not clear the front caliper but the et13's do?? they are genuine too. i cant figure it out, were e21 mims different to e30 mims?

The difference in offset is in the thickness of the hub face. The et25 hub face isn't as thick as the et13's, this means the inside edges of the spokes are 12mm closer to the hub, caliper and disc on the et25's.
Sorry, I'm not too good at explaining things, I hope this makes sense.