I wanted to black the grill and colour code the eye-brows....
I could've easily done this at home with a spray can and probably would've got a very good finish...but i wanted to do it perfect....so i decided to spray them at college (i could also do a write up on it, and use it for my college work)....
I took my time, and prepped all the panels, red-scotching to give a good key, and applying 3 coats of etch to the chrome kidney grill...i then applied some primer, checked the panels, and most were okay....so proceeded to paint (didn't need flatting, as most parts were coated quite well, and flatting probably wouldn't make much difference as there's not much surface area on show).
I then mixed up some water-based gloss black, and applied 3 coats..(eye-brows will be red, and need flatting so removed them!)
I then mixed up the lacquer, and went back to spray them, and noticed that i had little yellow over-spray from the person who'd been spraying on the other side of the booth!!!
2 hours worth of work...wasted...!!! I then didn't bother lacquering..!!!
I could put the grill on as it is, as you can't really notice the dots untill you look closely, but i want them perfect, as i don't wana have to mess about with them again, so I will be re-spraying all!!!
I also noticed someone touched the kidney grill while i was out of the booth, and you can now see the primer on 1 spot on the grill!!!
Anyway, here's some pics of the story so far.... will post pics of the finished product, and how it looks on the car once i've resprayed it this thursday!!!










Couldn't resist putting them on the car...just to see how it looks....
front bumper needs tidying up, and front wing needs knocking out....might just replace it along with the other side wings aswell as they have a little rust at the bottom mounting screw!
Kidney Grill doesn't line up properly yet, and eye-brows need colour-coding....the eye-brows have been removed (they were only placed on for the pic!)







Finally - before
After - 
Still to come:-
60/60 drop
17" RH's
Mtec 2 Kit
Full respray (not sure whether to keep it Brilliant Red, or change it!)
Tinted Windows
ICE





































