



Moderator: martauto






its bilstein shocks with spax -60/-40 springsgcorky wrote:looks good m8,r.e the wheels if it was mine......graphite/dark grey centes and polished lip...nice weather too...lucky begger![]()
change the bumper for max
whats suspension is on yours....sits quite level






i was going to paint them first until i decided whether i liked them or not before paying to have them done properly. the can with the 3 hoses is a breather kit and is recommended when going above stage 1(270bhp)oil circulates and runs back down to the sump while gases escape through a little filter.old_skool_2002 wrote:Looks cool.
Definitely dark grey/gunmetal on the wheels.
Would look ultra cool on that. I wouldn't use aerosol stuff on wheels.
What about going to a wheel refurbisher and getting them blasted and painted? I got a quote for £160 for 4 wheels which I though was pretty good. It was a place in Brum. You take the car in the morning and they do it while you shop in the city. Or alternatively, mail order service.
I'm sure I have the link for them somewhere.
That ride height looks spot on too.
What is the can with the three hoses coming out of it Fuzzy? (top of third pic)

I'm guessing that is to stop oil and oil fumes going into the cylinder?fuzzy wrote:i was going to paint them first until i decided whether i liked them or not before paying to have them done properly. the can with the 3 hoses is a breather kit and is recommended when going above stage 1(270bhp)oil circulates and runs back down to the sump while gases escape through a little filter.


OOh, wondered what it wasfuzzy wrote:i was going to paint them first until i decided whether i liked them or not before paying to have them done properly. the can with the 3 hoses is a breather kit and is recommended when going above stage 1(270bhp)oil circulates and runs back down to the sump while gases escape through a little filter.old_skool_2002 wrote:Looks cool.
Definitely dark grey/gunmetal on the wheels.
Would look ultra cool on that. I wouldn't use aerosol stuff on wheels.
What about going to a wheel refurbisher and getting them blasted and painted? I got a quote for £160 for 4 wheels which I though was pretty good. It was a place in Brum. You take the car in the morning and they do it while you shop in the city. Or alternatively, mail order service.
I'm sure I have the link for them somewhere.
That ride height looks spot on too.
What is the can with the three hoses coming out of it Fuzzy? (top of third pic)
i had an off the road incident that destroyed the original m-tec 2 and my local scrapyard had a standard whute touring bumper.....old_skool_2002 wrote: What's wrong with the bumper???
mine has a hose at the bottom to return the oil to the sump as well.gcorky wrote:catch tank ..catch the oil from the crank case vent...a lot of modders fit them...i got a 1 ltr one with a level indicator..
yeah i noticed that...where as i have to empty it every few monthsfuzzy wrote:mine has a hose at the bottom to return the oil to the sump as well.gcorky wrote:catch tank ..catch the oil from the crank case vent...a lot of modders fit them...i got a 1 ltr one with a level indicator..

quality mate, i like that a lot, thanksChris-W wrote:

That one. Want that one!Chris-W wrote:

thanks mate, ive already melted one clutch fluid reservoir,i moved this one back a bit until i get around to making up a heat sheild. i thought the samco hose would be ok with oil as its not continually immersed in it.whats your opinion on yhe wheels, silver or grey?SPADGE wrote:Fuzzy
Cars looking good fella!
However
Get a heat shield on there before you boil your clutch fluid amongst other things and bin that Samco hose from the breather as its not designed to carry oil and will rot away.
That breather will be returning into a little nozzle screwed into the block on the turbo side where Cosworth conveniently left a nice little threaded hole with a bung in it

Trust me i have seen melted/dissolved many a piece of Samco hose on breather systems. It takes a while but it will happen from the inside outfuzzy wrote:thanks mate, ive already melted one clutch fluid reservoir,i moved this one back a bit until i get around to making up a heat sheild. i thought the samco hose would be ok with oil as its not continually immersed in it.whats your opinion on yhe wheels, silver or grey?SPADGE wrote:Fuzzy
Cars looking good fella!
However
Get a heat shield on there before you boil your clutch fluid amongst other things and bin that Samco hose from the breather as its not designed to carry oil and will rot away.
That breather will be returning into a little nozzle screwed into the block on the turbo side where Cosworth conveniently left a nice little threaded hole with a bung in it