Factory immobiliser removal ?

[evodan]

Your help please chaps, can anyone confirm is it just a case of bridging the white socket with green wires located behind the glove box. Its a 93 tourer fitted with the factory immoboliser.

[Brianmoooore]

Correct! If it was fitted properly. Check the loom nearby - there should be a plug with a short loop of green wire tied up to the loom. Pull this out and plug it in.

[oze30]

Mine doesnt have th e2 wires, but then again, i dont have the imoboliser... unless there's no wires to any part of the engine/main loom

[Brianmoooore]

Mine doesnt have th e2 wires, but then again, i dont have the imoboliser... unless there's no wires to any part of the engine/main loom

Any facelift E30 will have this socket.

[evodan]

Thanks for your help guys