bloody htr wont work

Need technical Q/A then you're in the right place

Moderator: martauto

gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sun Feb 18, 2007 11:39 am

hi ive had this prob since owning the car its a 320 i touring 1990 . ok when at idle the htr blows hot air no prob i can even turn the htr to cool by turning the switch.ok but when you rev the car up untill 2000 rpm there is a clunking noise from the valve on the side of the matrix even if its un pluged i have a spare one and before i change this i need to no how do you tell if the pipes are around the wrong way i have got it srtripped down now so if its the valve i can change it .the noise happend even if no power is connected :cry:
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Feb 18, 2007 12:09 pm

Pipes are on the wrong way around on the bulkhead. One from the back of the head goes to the bottom stub pipe.
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sun Feb 18, 2007 12:28 pm

cheers brian yes the pipes were around the wrong way have changed them over and will run the car and see what happends cheers again brian :P
Last edited by gaszman on Sun Feb 18, 2007 6:01 pm, edited 1 time in total.
gaszman
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 3111
Joined: Wed Jan 03, 2007 11:00 pm
Location: Outside of Scummerland !

Post Sun Feb 18, 2007 2:16 pm

all sorted brian thanks again