Wiring (?) issues - cutting out

Need technical Q/A then you're in the right place

Moderator: martauto

jkarran
E30 Zone Regular
E30 Zone Regular
Posts: 327
Joined: Thu Jan 12, 2006 11:00 pm
Location: Isle of Man

Post Fri Feb 16, 2007 9:23 pm

I suspect i have a wiring fault, well I know I have some but I have one that's causing intermittant engine cutouts and now it seems to only run for a few sec after startup, dies then is hard to start.

I saw toughguych's thread, symptoms are similar, so I'll try what's mentioned there.

There is something loose in the loom above the steering column, either the two power plugs cllipped to the column tube (moving them causes cutout) or the main ecu loom (likewise!).

Ideas appreciate. It doesn't seem to know it's running when it is and the tacho/temp sender are playing up.

What a mess. I have a rally tomorrow as well :cry:

Anyone got a schematic for M20 loom?

Thanks in advance,
jk
E30 320i Rally Turd - Usually broken
E24 635Csi - Rotting in peace for now
E34 540i - Daily driver
Blown R1 Striker - In progress
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Feb 16, 2007 9:33 pm

If ECU connector is locked on properly, there shouldn't be any problem there.
Couple of wires on the connectors clipped to the column are a bit heavy gauge for the type of connector.
For wiring diagrams, go to www.autolib.diakom.ru/CARS2/ and click on BMW, third link down and "mitchell on demand".
jkarran
E30 Zone Regular
E30 Zone Regular
Posts: 327
Joined: Thu Jan 12, 2006 11:00 pm
Location: Isle of Man

Post Sat Feb 17, 2007 10:45 am

Thanks Brian,

Never would have found those diagrams without help 8O

jk
E30 320i Rally Turd - Usually broken
E24 635Csi - Rotting in peace for now
E34 540i - Daily driver
Blown R1 Striker - In progress
jkarran
E30 Zone Regular
E30 Zone Regular
Posts: 327
Joined: Thu Jan 12, 2006 11:00 pm
Location: Isle of Man

Post Sun Feb 18, 2007 11:40 am

Fixed... probably :roll: Ran all night without missing a beat.

Turns out there were 2 or 3 problem areas.

1. Dodgy imobiliser hack job... imobiliser and splices removed and joints resoldered.
2. Under dash power connectors (from ign barrel) were loose... fixed but I stabbed myself in the process :cursin:
3. Touching the fusebox caused the engine to run or stop depending on how you pressed it! Stripped and inspected, nothing obviously loose... while tracing the wires back I find the engine loom mulit plug has come loose, moving the fuse box moves it... screw down and she runs :cool:

I'm taking bets on what breaks next but for the moment I'm well chuffed, we actually got a finish and a good sideways rip round a forrest to boot :D

jk
E30 320i Rally Turd - Usually broken
E24 635Csi - Rotting in peace for now
E34 540i - Daily driver
Blown R1 Striker - In progress
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Feb 18, 2007 11:49 am

nicely done jk, glad she's ok for now
Image