front seat wobble?

Need technical Q/A then you're in the right place

Moderator: martauto

ric325i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1961
Joined: Tue Apr 04, 2006 11:00 pm
Location: Gateshead

Post Sat Feb 17, 2007 5:52 pm

ok my mot guy said that the seat cannot be locked in the upright position.

basically it can it just rocks backwards and forwards buy about 2 inches-ish each way.

they are the cloth sports seats, does anyone know how to tighten them up to stop the rocking? before i start taking them apart tomorrow :mad:
Image
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Sat Feb 17, 2007 5:54 pm

you may have snapped bases :cry:

but take the backs off and check theres a big screw on each side holding the backs to the base
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
ric325i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1961
Joined: Tue Apr 04, 2006 11:00 pm
Location: Gateshead

Post Sat Feb 17, 2007 5:57 pm

oh that sounds fun?

if there are no screws or a prob with the screws.......whats you suggestion?
Image
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Sat Feb 17, 2007 6:07 pm

My seats do the same thing. Interested to see the outcome of this topic.
Image
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Sat Feb 17, 2007 6:09 pm

if theyre missing
you need new ones lol

if frames have snapped its either new frames or weld em up
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
ric325i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1961
Joined: Tue Apr 04, 2006 11:00 pm
Location: Gateshead

Post Sat Feb 17, 2007 6:18 pm

cheers man, i will post up any progress but i have not got the car back from some series welding yet.
its been a week. :cry:

miss the old smoker already.
Image
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Sat Feb 17, 2007 6:20 pm

its more likely that the screws are loose

hopefully anyway
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
ric325i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1961
Joined: Tue Apr 04, 2006 11:00 pm
Location: Gateshead

Post Sat Feb 17, 2007 6:27 pm

yeah real lose. thanx man i would not have looked there....while i still have your attention is there a easy way to take off the back with out a hammer a screw driver(used in an aggressive manner) or a chain saw? :roll:
Image
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Sun Feb 18, 2007 12:59 am

yea i have just done this on my seat. have finished one but the other is in bits still. they are 2 door sport seats. i will be able to take tou through it step by step with pics.

i will post it in a sec
winkeye
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Sun Feb 18, 2007 12:59 am

to remove the backing just take the 2 screws out of the bottom and the push the panel up and bingo
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Feb 18, 2007 11:25 am

even with the screws in and tight, i've found that the seats are prone to woblling, so i underwent some investigation work...

its basically, where the braces on the bottom of the seat mechanism move inside the runners. im not sure what would be the best fix, other than to somehow make the braces fit tighter inside the runners, but even then, im not sure how you would achieve that
Image
ric325i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1961
Joined: Tue Apr 04, 2006 11:00 pm
Location: Gateshead

Post Sun Feb 18, 2007 3:14 pm

thanx people, i wish i could tell you its worked but the cars still in the garage. :cry:

begging to get it back im tempted to drive the big 5 series......no i must be strong!
Image