Can anyone explain this?

Need technical Q/A then you're in the right place

Moderator: martauto

Omi
Witty custom rank.
Posts: 1478
Joined: Sun Jan 09, 2005 11:00 pm
Location: Darlington, North East

Post Sat Feb 17, 2007 4:26 pm

Image

There's some evidence of rubbing on the chassis, but with the suspension loaded at full lock there is still clearance.

I never drive anywhere hard enough at full lock for things to move around, although the control arm bushes are knackered.

Could control arm bushes cause this kind of wear by allowing the inner edge to foul on full lock?

Tyres are 205/50/16... Anything else, just ask.

Need to sort this out urgently as I'm at Donny next weekend.

Cheers,

Omi
...or is it?
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Sat Feb 17, 2007 4:38 pm

You should be able to hear if the wheel is catching on the bodywork, so i would rule that out.

I think this is a camber problem.

As you can see in the pic, these tyres have a very illegal tread depth.

is the car lowered? I cant remember!
Image
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sat Feb 17, 2007 4:50 pm

have you possibly hit a kerb or pothole and bent something? a minor bump in mine caused the track rod to bend causing similar wear to yours.
Omi
Witty custom rank.
Posts: 1478
Joined: Sun Jan 09, 2005 11:00 pm
Location: Darlington, North East

Post Sat Feb 17, 2007 4:56 pm

The tread across 80% of the tyre is superb... There is wear to the inside quarter due to camber/tracking, but as you can see from the picture this is a definate scoring at an angle.

Would eccentric control arm bushings and the associated castor change improve clearance for the rear of the tyre as it sits on full lock?
...or is it?
ric325i
E30 Zone Squatter
E30 Zone Squatter
Posts: 1961
Joined: Tue Apr 04, 2006 11:00 pm
Location: Gateshead

Post Sat Feb 17, 2007 5:37 pm

hey man i jus changed my control arms and i think when the guy pressed the new bushes in they are not lined up properly and are causing wear on the inside of my front wheels :cry:


i need it sorting to so i think i will have to get them pressed out and pressed back in again after a small adjustment?

my wear is on the outside of the wheel whats yours?

could be worn bushes as a guess.
Image
User avatar
weston_masive
E30 Zone Newbie
E30 Zone Newbie
Posts: 5
Joined: Wed Feb 21, 2007 11:00 pm
Location: burnham on sea

Post Thu Feb 22, 2007 10:44 am

my rear have bad camber and they also tow in a lot i cant find a rear controll arm adjuster to sort this the only ones i have come accros is e36 etc non for my beloved e30 :cry:
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Thu Feb 22, 2007 6:49 pm

weston_masive wrote: i cant find a rear controll arm adjuster to sort this :cry:
E30's dont have one.

Rear suspension geomerty is "Fixed"

You can get eccentric trailing arm bush's to reduce the camber a little.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
J_Mac
E30 Zone Regular
E30 Zone Regular
Posts: 401
Joined: Thu Nov 02, 2006 11:00 pm

Post Thu Feb 22, 2007 8:07 pm

60/40 drop and my fronts are not to bad on the camber but my rears look like that after about a month, with 205/45/16, got me some 15's and it loads better because the tyre can displace a little more and even the wear a margin more, still bad enough tho. as kam said eccentric trailing arm bush's sort it abit
Image