measuring ohms?

Need technical Q/A then you're in the right place

Moderator: martauto

sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Fri Feb 16, 2007 11:01 pm

on abs systems i have read a good sensor should be around 970-1000 ohms.

what do i use to measure this?
old_skool
E30 Zone Team Member
E30 Zone Team Member
Posts: 3405
Joined: Fri Sep 01, 2006 11:00 pm
Location: Glossersure

Post Fri Feb 16, 2007 11:10 pm

Use a multimeter set on Ohms. iirc Brian Moooooore suggested they should read around 900 ohms. If the instrument has the facility then null the leads first.

If you get stuck then bring it over here and I'll test it for you, if it's bad I have some spare ones mate.
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Fri Feb 16, 2007 11:15 pm

Ok thats sounds great, thanks alot. I really want to get my ABS working, how do i null the leads? :D
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Feb 16, 2007 11:20 pm

Don't worry about nulling the leads on 900 odd ohms. Your meter is highly unlikely to have such a feature any way.

I've been nulling leads all day. Bloody testing takes longer than the job these days!!
old_skool
E30 Zone Team Member
E30 Zone Team Member
Posts: 3405
Joined: Fri Sep 01, 2006 11:00 pm
Location: Glossersure

Post Fri Feb 16, 2007 11:24 pm

sam325is wrote:Ok thats sounds great, thanks alot. I really want to get my ABS working, how do i null the leads? :D
No real need to if you know what your meter is like. Set the meter on ohms and touch the probes together - record the reading it gives when you touch them together.

Then probe the two wires of the ABS sensor with the two probes on your meter and record the result.

Then take the this last figure and deduct the first reading. That way you rule out the resistance of the leads.

Some meters allow you to reset or null this figure before you start measuring. If you get stuck then trundle over here on Sunday and I'll check them out and sort out the other bits at the same time :wink:
old_skool
E30 Zone Team Member
E30 Zone Team Member
Posts: 3405
Joined: Fri Sep 01, 2006 11:00 pm
Location: Glossersure

Post Fri Feb 16, 2007 11:28 pm

Brian where have you been? You leave the shop unattended for a few minutes and I start answering technical questions. Bloody liberty :D
I've been nulling leads all day. Bloody testing takes longer than the job these days!!
Joy, don't you love "Part P"
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Fri Feb 16, 2007 11:36 pm

http://www.maplin.co.uk/Search.aspx?cri ... ce=15&SD=Y I was thinking of buying this tommorow.

i have read that if the abs light comes on whilst driving its a bad sensor or broken wire or a generally bad connection somewhere

but if it comes on immediatley when you start the car before driving its the abs relay or computer

is this right?

i think im going to have problems with this by the sound of it but i will give it my best shot. if i do have trouble i wouldnt be able to bring it this sunday as it has no MOT, thanks for the offer though. i hope to get it through MOT next week then its going to the body shop at the end of next week for the weekend.after that i would be able to.

if i still havent sorted it then i would love to bring it over if you have the time :D
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Sat Feb 17, 2007 1:03 am

is the above right? as im going to attempt it this weekend

Thanks
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 17, 2007 1:10 am

sam325is wrote:is the above right? as im going to attempt it this weekend

Thanks
All basically correct.
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Sat Feb 17, 2007 1:16 am

Ok Thanks. i knew what you said was correct i wasnt doubting that. i was talking about what i had written about:-

the abs light comes on whilst driving its a bad sensor or broken wire or a generally bad connection somewhere

but if it comes on immediatley when you start the car before driving its the abs relay or computer

just to save any confusion lol

Thanks guys