e36 window switch swap.

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Giggz
E30 Zone Camper
E30 Zone Camper
Posts: 1270
Joined: Wed Apr 13, 2005 11:00 pm
Location: East London

Post Wed Feb 14, 2007 6:06 pm

Im kind of thinking its not as simple as just purchasing a couple of switches for a e36 and plugging them into my e30. Thats exactly what i did :roll:

I have seen a couple of people post up saying they have done this but can someone tell me how to exactly?

Thanks.
Image
^stolen but not forgotten^
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Wed Feb 14, 2007 6:11 pm

You need to go to the breakers and grab the connector blocks (including a decent length of cable behind them) that plug into the back of the swtiches... then splice in the exising cables from the feed to your originals...

Before you do this though... you need to slightly enlarge the existing holes in the centre console for the switch to fit. Be careful... too large and you're buggered! I'd advise getting one from a scrapper to play around with too.

There is actually a detailed write up of this mod somewhere on the internet...

Here in fact! http://www.strictlyeta.net/technical/e36switches.html

Hope this helps...

Giles.
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed Feb 14, 2007 6:16 pm

http://strictlyeta.net/technical/e36switches.html

Heres are write up, don't think you can get the one touch working though.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Wed Feb 14, 2007 6:17 pm

Kedge... catch up dude. :roll:
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed Feb 14, 2007 6:19 pm

:bla:
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Wed Feb 14, 2007 6:21 pm

:P winkeye
Giggz
E30 Zone Camper
E30 Zone Camper
Posts: 1270
Joined: Wed Apr 13, 2005 11:00 pm
Location: East London

Post Wed Feb 14, 2007 6:26 pm

Cheers guys thats very helpful.

So has anyone got the "kit" needed for this mod?

Im a lazy bugger and plus i dont think i got any scrappies local to me.

Thanks.
Image
^stolen but not forgotten^
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Thu Feb 15, 2007 10:19 am

The only 'kit' you'll need are the switches and the connector blocks...

I 'think' I may have some in a box in the garage somewhere... I'll have a dig about and see if I can find them over the weekend.

G.