alarm help
Moderator: martauto
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
im fitting a alarm
i need to find these wires on a e30
ignition inout
ignition output
starter input
starter output
also i have four wires for central locking on the alarm
which ones would i need to connect these are the wires
door lock normally open
door lock normally closed
door unlock normally open
door unlock normally closed
i know the central wires on the e30 there are two one for unlock and one for lock will i need to connect all four if not which two
all help will be greatly apprecaited thanks
i need to find these wires on a e30
ignition inout
ignition output
starter input
starter output
also i have four wires for central locking on the alarm
which ones would i need to connect these are the wires
door lock normally open
door lock normally closed
door unlock normally open
door unlock normally closed
i know the central wires on the e30 there are two one for unlock and one for lock will i need to connect all four if not which two
all help will be greatly apprecaited thanks
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
any 1
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
See "Fitting Scorpion alarm" thread.
-
marty1979
- E30 Zone Newbie

- Posts: 108
- Joined: Mon Nov 06, 2006 11:00 pm
- Location: Bristol
Hi mate, give Brianmoore a shout, he's awesome with anything to do with these cars and I'm sure he could sort you out in minutes. No pressure Bri 
-
marty1979
- E30 Zone Newbie

- Posts: 108
- Joined: Mon Nov 06, 2006 11:00 pm
- Location: Bristol
And he's quick too 
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
brian i have sorted the starter and ignition wires out
tested and they all work fine thanks
im trying to get the central locking working i have conneted the unlock and lock wires correctly to the alarm as a negative trigger
also i had to connect the interior light supply as negative trigger
when i try to arm the alarm the doors dont lock and if the door is open and if you try to arm then the doors lock whats wrong here
tested and they all work fine thanks
im trying to get the central locking working i have conneted the unlock and lock wires correctly to the alarm as a negative trigger
also i had to connect the interior light supply as negative trigger
when i try to arm the alarm the doors dont lock and if the door is open and if you try to arm then the doors lock whats wrong here
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
4 wires from alarm for central locking ????
i thought you only need'd 2.....lock and unlock.......
I think that you only need a momentary earth to lock/unlock on the E30.....might be wrong, long time since i fitted alarms to E30's....
i thought you only need'd 2.....lock and unlock.......
I think that you only need a momentary earth to lock/unlock on the E30.....might be wrong, long time since i fitted alarms to E30's....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
i connected the two wires that are for the lock and unlock i checked the diagram and i have connected it so its a negative trigger
i done the same for the interior light i connected the wire as a negative trigger because when the door is closed the wire gives 12v and when opened it give 0
now when i arm the alarm the doors dont lock
if the door is open the door locks when i set the alarm
is the door trigger meant to be a positive trigger?
heres how i connected the central locking this is the clifford diagram

i done the same for the interior light i connected the wire as a negative trigger because when the door is closed the wire gives 12v and when opened it give 0
now when i arm the alarm the doors dont lock
if the door is open the door locks when i set the alarm
is the door trigger meant to be a positive trigger?
heres how i connected the central locking this is the clifford diagram

PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Not quite sure what the instructions mean by this. Normally open and normally closed refer to the normal or unenergized state of the contacts of a switch or relay - contacts in the plural. What does the other side of the contact connect to?DJ_B4L wrote:
also i have four wires for central locking on the alarm
which ones would i need to connect these are the wires
door lock normally open
door lock normally closed
door unlock normally open
door unlock normally closed
i know the central wires on the e30 there are two one for unlock and one for lock will i need to connect all four if not which two
I would think you need the normally open ones, as in the normal state the lock and unlock request lines of an E30 are floating.
Lock request is a yellow/blue wire, and unlock request is green/blue.
The lock and unlock request wires from the boot lock are different colours and connect to the locking ECU on different pins, but they connect together internally. No idea why BMW wired it like this!
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
brian have a look at my above post i have figured out which wires to connect to the car but its doing the above
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Disconnect the yellow/blue and green/blue from the alarm, and try connecting each of them momentarily to earth.
Driver's door must be shut, but the passenger door can be open.
Doors should lock when you connect the yellow/blue and unlock when you connect the green/blue. This will check that the E30 part of things is working, and that you have the correct wires.
If this works then try some of the other wires from the alarm.
Re your diagram: It looks like the other side of the contacts that I referred to may be the red/green and red/orange.
Are the white/orange and white/green the "door lock normally open" and "door unlock normally open" contacts?
Driver's door must be shut, but the passenger door can be open.
Doors should lock when you connect the yellow/blue and unlock when you connect the green/blue. This will check that the E30 part of things is working, and that you have the correct wires.
If this works then try some of the other wires from the alarm.
Re your diagram: It looks like the other side of the contacts that I referred to may be the red/green and red/orange.
Are the white/orange and white/green the "door lock normally open" and "door unlock normally open" contacts?
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
il try that tomorrow the door locks otherwise with the key or push of the pin
the reg/green and red/orange are earthed as it says in the diagram i have done that
the white/orange is door unlock common and white/green is door lock common
door lock normally closed and door unlocl normally these are not connected same as the diagram and are meant to be insulated seperatly
these are the grey/green and grey/ orange as shown on the diagram
brian sure the interior light wire isnt meant to be positive trigger
the reg/green and red/orange are earthed as it says in the diagram i have done that
the white/orange is door unlock common and white/green is door lock common
door lock normally closed and door unlocl normally these are not connected same as the diagram and are meant to be insulated seperatly
these are the grey/green and grey/ orange as shown on the diagram
brian sure the interior light wire isnt meant to be positive trigger
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Can't see what the interior light has to do with the locking, but the interior light is earth to operate, the same as the alarm.
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
i think it does because when i try to arm the alarm when the doors are shut the doors dont lock
and when the doors are open the alarm arms and the doors lock
and when the doors are open the alarm arms and the doors lock
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
That's possible, I suppose, as the alarm kit is made for lesser cars as well, not just BMWS.DJ_B4L wrote:i think it does because when i try to arm the alarm when the doors are shut the doors dont lock
and when the doors are open the alarm arms and the doors lock
This is unnecessary, as the E30 will not lock if the driver's door is open.
Try disconnecting the door pin switch from the alarm.
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
you mean try disconnect the door interior light switch wire from the alarm
my doors can be locked with the doors open even the drivers door what does that mean they can double lock with the key if i turn it and hold it
my doors can be locked with the doors open even the drivers door what does that mean they can double lock with the key if i turn it and hold it
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If the driver's door is open, and you lock the doors by whatever method, they should lock and then immediately unlock again.
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
its doesnt do that if my driver door is open and i push the pin it will go down and shut the other doors aswel unless i pull the inside handle the door pins will open up again
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
brian if i try to connect the alarm light trigger wire to the earth side of the doo switch would that make it door the opposite so the doors close when the door is shut?
or shall i try to connect the door trigger switch as a positive trigger
or shall i try to connect the door trigger switch as a positive trigger
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
brian i fixed the problem i needed to fit another earth for the alarm neg wires the wires were running off didnt give enough current
so now it unlocks and locks correctly
im looking to hook up the head lights so they turn on when i press the alarm button for the head lights will i need do fit a relay for this
also i have two electric window modules that were fitted to the car before but the alarm is not there i still have the modules connected i prob just need to add earth, power and a neg signal?
thanks for all the hope so far
so now it unlocks and locks correctly
im looking to hook up the head lights so they turn on when i press the alarm button for the head lights will i need do fit a relay for this
also i have two electric window modules that were fitted to the car before but the alarm is not there i still have the modules connected i prob just need to add earth, power and a neg signal?
thanks for all the hope so far
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Existing headlamp relay is earth to operate, but the supply for the coil is switched ignition 12V+, not permanent 12V+. Steering diodes could be added, but it would be easier to fit another relayDJ_B4L wrote:
im looking to hook up the head lights so they turn on when i press the alarm button for the head lights will i need do fit a relay for this
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
any idea how i should connect this relay i have a relay that i can use which wires do i connect on the relay and what colour are theses
the relay i have has 5 pins 4 around one in the centre
the relay i have has 5 pins 4 around one in the centre
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Connect the normally open contacts of your relay between pin 87 of relay K4 (dipped headlamps) or 87 of K3 (main beams), and the outer wire of fuse 24, 25 or 26.
25 and 26 may not have connectors fitted for the outer pin, so either fit one, plus a 15A fuse or use 24.
Connect the wires at the underside of the fusebox PCB, and thread the wires down through the flexible trunking into the glovebox area, where you can fit the relay.
25 and 26 may not have connectors fitted for the outer pin, so either fit one, plus a 15A fuse or use 24.
Connect the wires at the underside of the fusebox PCB, and thread the wires down through the flexible trunking into the glovebox area, where you can fit the relay.
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
heres a pic of the relay i have

would i have to connect mine like this aswel?

also when i press the light button would it turn both lights on or jus the main beam?

would i have to connect mine like this aswel?

also when i press the light button would it turn both lights on or jus the main beam?
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
85 and 86 connect to the alarm (or probably one of them does and the other goes to earth), 30 goes to fuse 24, 25 or 26, and 87 goes to 87 of K3 or K4, depending on whether you want dipped beams or main beams.
If you want main and dipped, then you will need two relays.
If you want main and dipped, then you will need two relays.
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
thanks for that brian
fitted the alarm all working now jus left the lights for now and will do them later
fitted the alarm all working now jus left the lights for now and will do them later
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
