did they ever put 2.7 straight in cabs? or are they very rare?
does any one have a picture of one?
also is there anything to watch out for if a 2.5 has been bored out to a 2.7? whats involved?
info well appreciated!
does any one no! about 2.7 in cabs?
Moderator: martauto
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
An "original" 2.7 cab would only be in Alpina guise and I'm not sure if any of the other BMW tuners may have done 2.7 variants like Hartge etc.
But otherwise any cab or other e30 with a 2.7 is a conversion, usually using the bottom end from the "eta" engine found in the E28 525e combined with other M20 bits, different combinations can be used.
But otherwise any cab or other e30 with a 2.7 is a conversion, usually using the bottom end from the "eta" engine found in the E28 525e combined with other M20 bits, different combinations can be used.
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
H27?
-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
how long do the conversions usual stand up for? are they pretty hardwearing?
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
I'm sure the Hartge is - I'm afraid I don't know about any others.
Do a zone search on H27
Do a zone search on H27
-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
sorry, whats a zone search?
-
chu346
- E30 Zone Addict

- Posts: 2403
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Leicester
never seen a H27 cab
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
if the components used are in good order to start with and you service it as you would the normal engine they should last just as well as a standard 325 lump, possibly even better due to low end torque giving you the shove rather than revving the fanny off it, but not revving the 6 pot is unlikely 
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
look at the top of this page
just below the Forum tab is a link called 'Search'
press it
then type 'H27' in the top text-box, then press 'enter'
just below the Forum tab is a link called 'Search'
press it
then type 'H27' in the top text-box, then press 'enter'
-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
is there anything to watch out for with them?
-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
cool
