different versions of m30
Moderator: martauto
-
e30Alex
- E30 Zone Newbie

- Posts: 196
- Joined: Wed Feb 07, 2007 11:00 pm
- Location: Southport
hey everyone,im going to a bmw breakers to get a m30 3.5 out of a 535i soon. its just that i dont trust them an i wana make sure i get a e34 5 series version.Is there any way to tell if its a late spec m30?Cheers
Im a two car man. Shame my bike gets used more.Damn the MOT!
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
The airbox should be a long thinish shape as opposed to a flat square pancake type. AFAIK that is
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Yeah, the air box is very different.
Also, I think (not 100% sure) that the early engines have a water pipe at the back of the cylinder head and later ones don't. ?
If the engine is on a manual gearbox still then the early ones have two sensors on the bell-housing, later ones are blanked off.
The sump is also different but I'm sorry I don't know what an early one looks like to compare! Might be able to do a search on the net (I'm at work and just sneaking on to the zone when I can!).
If it's out of a manual car, a late one should have a big, nasty dual mass flywheel. An early one has a thinner single mass flywheel.
Check that it does say '3.5' on the inlet manifold too!
You'll also need an M30 throttle cable, cooling hoses and downpipes.
Also, I think (not 100% sure) that the early engines have a water pipe at the back of the cylinder head and later ones don't. ?
If the engine is on a manual gearbox still then the early ones have two sensors on the bell-housing, later ones are blanked off.
The sump is also different but I'm sorry I don't know what an early one looks like to compare! Might be able to do a search on the net (I'm at work and just sneaking on to the zone when I can!).
If it's out of a manual car, a late one should have a big, nasty dual mass flywheel. An early one has a thinner single mass flywheel.
Check that it does say '3.5' on the inlet manifold too!
You'll also need an M30 throttle cable, cooling hoses and downpipes.
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
OH..
The other thing i just remembered...
It should say 3.5 on the inlet as driftboy said, NOT 2.8, 3.2/3.5
The other thing i just remembered...
It should say 3.5 on the inlet as driftboy said, NOT 2.8, 3.2/3.5
-
charlE30
- E30 Zone Addict

- Posts: 3818
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Warwick
The early ones have two horrble metal brackets going from the inlet manifold to the rocker cover (very visable) early inlet manifolds also had 3.2/3.5 written on.. just been out and looked at my "spare" E28 M30 3.5..
This link has a photo of an early: http://www.bmwmregistry.com/faq/E28_M535i_engine.jpg
Have you been on www.e30.de? whole section on the 335 conversion
Charlie
This link has a photo of an early: http://www.bmwmregistry.com/faq/E28_M535i_engine.jpg
Have you been on www.e30.de? whole section on the 335 conversion
Charlie
BMW E30 344i track car 
BMW F31 335d xdrive
BMW F31 335d xdrive
-
e30Alex
- E30 Zone Newbie

- Posts: 196
- Joined: Wed Feb 07, 2007 11:00 pm
- Location: Southport
Thats great thanks guys!
Im a two car man. Shame my bike gets used more.Damn the MOT!
