How much does a 6 pot E30 weigh in as standard?
Has anyone got it down to <900kg on a project/track car?
Weight Reduction
Moderator: martauto
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
About 1200kg-1300kg
Think it will be very very hard to get 6pot E30 under 900kg i don't think DTM cars were under 900kg.
Most people get just over the 1000kg mark.
Think it will be very very hard to get 6pot E30 under 900kg i don't think DTM cars were under 900kg.
Most people get just over the 1000kg mark.

-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
in my owners manual my 87 325i sport weighs 1190kg

-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
I remember reading something on a 205 that weighed 870kgs and he managed to get it down to 660kg i think. That is a 20% loss. But don't think that this was easy, this guy basically stripped the shell bare and rebuilt it drilling holes in anything not structural. plastic windows, you name it, it had it. There wasn't one thing left that wasn't needed and the sadest thing was that he rolled it a few weeks later
What i'm getting at to get a 1150kg e30 down to 900kgs which is over a 20% loss of weight, it would be a phemonenal acheivement, and one that is nearly impossible I would have thought. Plus when you put the driver back in thats 60kgs right up to 200kgs for americans
that you have to lose somewhere.
There is stripping weight out then there is doing it seriously to get under a ton. If you want to lose that much weight buy a caterham?
What i'm getting at to get a 1150kg e30 down to 900kgs which is over a 20% loss of weight, it would be a phemonenal acheivement, and one that is nearly impossible I would have thought. Plus when you put the driver back in thats 60kgs right up to 200kgs for americans
There is stripping weight out then there is doing it seriously to get under a ton. If you want to lose that much weight buy a caterham?
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
I think that was a MK1 golf.
And more like 100kg i weigh 70kg and i'm ver skinny
And more like 100kg i weigh 70kg and i'm ver skinny

-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
Thats right it was a golf mk1. My bad.
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
Yeah, saw that mk1 golf!!!!!! Looked awesome, shame he wrecked it after all that work!!
I reckon you could lose a lot of weight drilling some bits out of a touring!!!! Was thinking about it while stripping the one on my drive!!
I reckon you could lose a lot of weight drilling some bits out of a touring!!!! Was thinking about it while stripping the one on my drive!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
Milko
- E30 Zone Newbie

- Posts: 206
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: East Yorkshire
I've got my Civic down from 1040kg to 840kg, not easy, and expensive, lightweight parts cost ALOT!



I'd be happy if my E30 is under 1100kg with the M30 in....



I'd be happy if my E30 is under 1100kg with the M30 in....
90' 2dr 335i - 220bhp and 206lbft - 1/4 in 14.7 @ 97 mph *FOR SALE*
-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
Strange isn't it, seems to be near impossible to get more than 20% of the weight off any car(excluding BIG executive barges)
That looked quite a weapon Milko.
That looked quite a weapon Milko.
-
Milko
- E30 Zone Newbie

- Posts: 206
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: East Yorkshire
Yeah, I ran 12.9 @ 106mph last yr, with a N/A 1.8 lump standard internals.Jon_Bmw wrote:Strange isn't it, seems to be near impossible to get more than 20% of the weight off any car(excluding BIG executive barges)
That looked quite a weapon Milko.
This year I should go slightly quicker with new engine....


90' 2dr 335i - 220bhp and 206lbft - 1/4 in 14.7 @ 97 mph *FOR SALE*
-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
Jebus
Are these the engines that have management you can play about with yourself with the aid of a laptop? That downpipe has got to be 3.5"+! Quality.
Are these the engines that have management you can play about with yourself with the aid of a laptop? That downpipe has got to be 3.5"+! Quality.
-
Milko
- E30 Zone Newbie

- Posts: 206
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: East Yorkshire
Yeah sort of, if you know what your doing, there are a few different systems around, Crome being one of them, you download all the software yourself and can play around with it, Standard honda vtec engines run OBD1 or 2 type systems like E36's, my last engine had a piggyback system on the standard ECU, the new one will running a DTA standalone system, which you can plug laptops into and map yourself etc...
Downpipe is 4", should do well over 400bhp, turbo will do 550bhp max in the trim I have it in, but I dont think the block would hold that much for long!
Anyway back on topic!
I'd be intrested to know who has the lightest E30 on here......
Downpipe is 4", should do well over 400bhp, turbo will do 550bhp max in the trim I have it in, but I dont think the block would hold that much for long!
Anyway back on topic!
I'd be intrested to know who has the lightest E30 on here......
90' 2dr 335i - 220bhp and 206lbft - 1/4 in 14.7 @ 97 mph *FOR SALE*
