e30 parts questions!!

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Weeman
E30 Zone Newbie
E30 Zone Newbie
Posts: 179
Joined: Wed Jan 31, 2007 11:00 pm

Post Mon Feb 12, 2007 10:32 am

Help me please guys? hehe


I have the following parts, initially purchased for a 325i touring. I have some 30mm drop H+R springs, what will be the effect should these be put on a normal sedan?? I'm guessing they will a little stiff on the rear.

I have some new brake disks and ferodo pads, plus some teflon hoses, would these fit the brakes on a 318is? or are they different, I'm currently in the process of finding another e30 and it may be a 325 sedan or 318is. I also have some powerflex parts, m3 bushes and the like, and i'm hoping they fit also.

Thanks Guys
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Mon Feb 12, 2007 11:46 am

Brakes and hoses will be fine, I assume you got the 6 hose kit for an e30 with rear discs?

The rear springs will not lower the saloon as much as the touring as they are designed for the heavier rear end of the touring. All the bushes will also fit any e30.
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Mon Feb 12, 2007 11:48 am

My guess is the sedan will sit higher on the tourer springs

No difference between the 318iS & 325i brake setup regarding discs / pads, i think there is a difference with the hoses depending if you have ABS or not...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
Weeman
E30 Zone Newbie
E30 Zone Newbie
Posts: 179
Joined: Wed Jan 31, 2007 11:00 pm

Post Mon Feb 12, 2007 11:56 am

Ahhhh thanks guys, yeah I have an OMP 6 hose set for rear disks.

Good to know most of those bits will fit the other model though, weight off my mind slightly.

Cars going to be used on The Nordschielfe, when its done.