325 se temp guage fault....Help pls
Moderator: martauto
-
preditor
- E30 Zone Newbie

- Posts: 3
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: banbury,oxon
i have a 1991 352 and my temp guage reads at the max as soon as ignition is switched on the sensor has been replaced but still the same... after running for appx 30 mins the guage normally starts working correctly but suffers from the occasional twitch of the needly....i have been told this is quite common...can anyone throw any light on the cause....thanks 
-
Nelly
- Gumbo

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Divorce Central
Pop the complete dial cluster out of the dash fella - on the back of the cluster directly behind the fuel + temp gauges is a small 8mm nut that does (on all e30's) come loose, it may even of fallen off over time - simply replace it if lost or tighten up if loose, hopfully this should cure your problem.
Neil.
Neil.
-
preditor
- E30 Zone Newbie

- Posts: 3
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: banbury,oxon
thanks i will give it a try 

