Washer Nozzle Adjustment
Moderator: martauto
-
KDS
- E30 Zone Newbie

- Posts: 194
- Joined: Thu Jan 20, 2005 11:00 pm
- Location: Vancouver, Canada
I need to make some adjustment to my windshield washer nozzles, two of which are currently spraying the ROOF of my car. Push pins are too large. Is there a tool I can pick up? Any suggestions welcome.

-KDS in Vancouver ('88 325i Touring)
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
I have noticed pins are getting bigger too...try a fine needle
-
charlE30
- E30 Zone Addict

- Posts: 3818
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Warwick
Fine sewing needle does the trick mate, just done mine 
BMW E30 344i track car 
BMW F31 335d xdrive
BMW F31 335d xdrive
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
You may want to spray the nozzle with WD40 first, as sometimes they get stuck.
Then use a fine needle to adjust them.
Then use a fine needle to adjust them.


