ARB link question
Moderator: martauto
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
Hi all,
Im fitting e30 m3 struts to my car.Which front arb link should i use ?
For those who dont know ,on e30's the arb link mounts on the front wishbone but on m3's they have a long link which connects to the strut housing.
Is the m3 one better ?
cheers andy
Im fitting e30 m3 struts to my car.Which front arb link should i use ?
For those who dont know ,on e30's the arb link mounts on the front wishbone but on m3's they have a long link which connects to the strut housing.
Is the m3 one better ?
cheers andy
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
M3 setup is better 
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Not so much better, just a greater roll stiffness for a given diameter of ARB.
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
so use the m3 one then and not the standard one.I supose thats why the m3 one was fitted in the first place
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The probable reason the design was changed for the M3 was to make it easier to make the ARB adjustable.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Use the M3 one
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
do you have any pics of the M3 ones?
i'm wondering about retrofitting ARB droplinks to the struts as the links on mine seem to last 6 months before the bushes die. if the roll stiffness is increased (make sense now you mention it!) then it can only be a good thing!
i'm wondering about retrofitting ARB droplinks to the struts as the links on mine seem to last 6 months before the bushes die. if the roll stiffness is increased (make sense now you mention it!) then it can only be a good thing!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
ooh! looks nice!
i may have a go at that then, it looks fairly straightforward to knock up a bracket.
i may have a go at that then, it looks fairly straightforward to knock up a bracket.
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Only up to the optimum level - and that can only be decided by track testing.gareth wrote:if the roll stiffness is increased (make sense now you mention it!) then it can only be a good thing!
I spent four days at Silverstone a few years ago, with a professional single seater race team, and learnt an awful lot about suspension and general car set up in those four days - how one thing interacts with another, how adjusting one thing upsets another etc., etc.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
With the long links dropping to the ARB a race set up could easily be made adjustable by moving the pick up points on the bottom end of the drop links.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
agreed.
maybe fitting a cylindrical adaptor to the end of the standard ARB that allows a large rod end bearing to be moved back and forth? would need a big rod end though to go over the whole ARB.
maybe fitting a cylindrical adaptor to the end of the standard ARB that allows a large rod end bearing to be moved back and forth? would need a big rod end though to go over the whole ARB.
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
thanks guys,i'll fit the m3 one.
Gareth,the mount on the strut is fairly chunky so if you do make one make sure its beefy enough.
Gareth,the mount on the strut is fairly chunky so if you do make one make sure its beefy enough.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
not a problem!!! 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details



